background image

English

WARNING

The appliance may only be 

connected to an electric sup-

ply that has been installed by 

an electrician in accordance 

with IEC 60364.

The appliance may only be 

connected to alternating cur-

rent. The voltage must corre-

spond with the type plate of 

the appliance.

For safety reasons, we rec-

ommend that you operate the 

appliance only via a residual 

current device (max. 30 mA).

An unsuitable electrical ex-

tension cable can be hazard-

ous. Only use an electrical 

extension cable which has 

been approved and labelled 

for this purpose and has an 

adequate cable cross-section 

outdoors: 1 - 10 m: 1.5 mm

2

10 - 30 m: 2.5 mm

2

Always fully unreel the exten-

sion cable from the cable 

drum.

DANGER

The user must use the appli-

ance as intended. The person 

must consider the local condi-

tions and must pay attention 

to other persons in the vicinity 

when working with the appli-

ance.

Check important compo-

nents, such as high-pressure 

hose, hand spray gun and 

safety installations, for dam-

age prior to every operation. 

Immediately replace dam-

aged components. Do not op-

erate appliance with dam-

aged components.

High-pressure jets can be 

dangerous if improperly used. 

The jet may not be directed at 

persons, animals, live electri-

cal equipment or at the appli-

ance itself.

The high-pressure jet must 

not be directed at other per-

sons or the user him-/herself 

to clean clothing or footwear.

Vehicle tyres/tyre valves are 

susceptible to damage from 

the high-pressure jet and may 

burst. The first indication for 

this is a discolouration of the 

tyre. Damaged vehicle tyres/

tyre valves are perilous. Keep 

a minimum jet distance of 

30 cm during cleaning!

Safe handling

Summary of Contents for K 2

















Reviews: