background image

14 

English

Î

Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.

The appliance is maintenance-free.

Use only original KÄRCHER spare parts. 
You will find a list of spare parts at the end 
of these operating instructions.

You can rectify minor faults yourself with 
the help of the following overview. 
If in doubt, please consult the authorized 
customer service.

Danger

Turn off the appliance and remove the 
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the 
authorized customer service.

Î

Pull on the lever of the trigger gun; the 
device will switch on.

Î

Check whether the voltage indicated on 
the type plate corresponds to the volt-
age of the mains supply.

Î

Check the mains connection cable for 
damages.

Î

Appliance ventilation: Switch the appli-
ance on with the high-pressure hose 
detached and operate (max. 2 minutes) 
until the water exits the high-pressure 
connection without bubbles. Switch off 
appliance and reconnect high-pressure 
hose.

Î

Check the water supply.

Î

Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.

Î

Clean high-pressure nozzle: Remove 
dirt and debris from the nozzle bore, us-

ing a needle and rinse through with wa-
ter from the front.

Î

Check water flow quantity.

Î

Slight leakage from the appliance pump 
is normal. If the leakage increases con-
tact the authorized customer service.

Î

Detach spray lance from the trigger 
gun. Work only with the trigger gun.

Î

Clean the detergent suction hose filter.

Î

Check the detergent suction hose for 
kinks.

Subject to technical modifications!

Maintenance

Spare parts

Troubleshooting

Appliance is not running

Pressure does not build up in the 
appliance

Strong pressure fluctuations

Appliance is leaking

No detergent infeed

Technical specifications

Electrical connection

Voltage

220-240
1~50/60

V
Hz

Connected load

1,4 kW

Power consumption

6 A

Protection class

IP X5

Protective class

II

Mains fuse (slow-blow)

10 A

Water connection

Max. feed temperature

40 °C

Min. feed volume

8 I/min

Feed pressure

0,2-1,2 MPa

Performance data

Working pressure

8 MPa

Max. permissible pressure

11 MPa

Water flow rate

5,5 I/min

Detergent flow rate

0,4 I/min

Recoil force of trigger gun

10 N

Dimensions and weights

Length

271 mm

Width

246 mm

Height

493 mm

Weight 4,4 kg

Values determined as per EN 60335-2-79

Hand-arm vibration value
Uncertainty K

<2,5

0,3

m/s

2

m/s

2

Sound pressure level L

pA

Uncertainty K

pA

76

2

dB(A)
dB(A)

Sound power level L

WA

 + Un-

certainty K

WA

91 dB(A)

Summary of Contents for K 2.97 M

















Reviews: