Kärcher K 2.91 MD, Operating Instructions Manual

Page: 5 / 12

English
5
„ Never leave the appliance unattended
when it is in operation.
„
Make sure that the power cable or ex-
tension cables are not damaged by run-
ning over, pinching, dragging or similar.
Protect the power cable from heat, oil,
and sharp edges.
„ The connection between the power ca-
ble and extension cable must not lie in
water.
„ All current-conducting parts in the work-
ing area must be protected against jet
water.
„ The appliance may only be connected
to an electrical supply which has been
installed in accordance with IEC 60364.
„ The appliance may only be connected
to alternating current. The voltage must
correspond with the type plate on the
appliance.
„ The minimum fuse rating required at the
socket outlet is 10 A (slow-blow).
„
To avoid accidents due to electrical
faults we recommend the use of sockets
with a line-side current-limiting circuit
breaker (max. 30 mA nominal tripping
current).
„ The plug and coupling of the extension
cable used must be watertight.
„ Always fully unroll electrical cables from
the cable drum.
Safety devices serve to protect the user
and must not be rendered inoperational or
their functions bypassed.
The switch prevents unintented starting of
the appliance. Stop the appliance during
breaks or after operation.
The safety catch on the handgun prevents
the appliance from being switched on unin-
tentionally.
Safety Devices
Power switch
Safety catch