Kärcher K 2.360, Instructions Manual

Page: 16 / 28

16 English
Caution
Only separate the high-pressure hose from
the trigger gun or the appliance while there
is no pressure in the system.
 After operation with detergent: Fill the
detergent tank with clear water, turn the
spray lance with pressure regulator to
the position "Mix", switch the appliance
on for about 1 minute and rinse with
clear water.
 Release the lever on the trigger gun.
 Turn off the appliance "0/OFF".
 Turn off tap.
 Detach the appliance from the water
supply.
 Press the lever on the trigger gun to re-
lease any remaining pressure in the
system.
 Lock the lever on the trigger gun.
 Pull out the mains plug.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
during transport (see Specifications).
 Pull the appliance by its transport han-
dle.
 Empty detergent tank.
 Secure the appliance against shifting
and tipping over.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it (see
Specifications).
Prior to extended storage periods, as dur-
ing the winter, also observe the instructions
in the Care section.
 Park the machine on an even surface.
 Insert the trigger gun in its holder.
 Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.
Caution
Protect the appliance and its accessories
against frost.
The appliance and its accessories can get
destroyed through frost if there are any wa-
ter residues in them. To avoid damage to
them:
 Completely drain all water from the ap-
pliance: Switch the appliance on with
detached high-pressure hose and de-
tached water supply (max. 1 minute)
and wait, until no more water exits at the
high-pressure connection. Turn off the
appliance.
 Store the appliance and the entire ac-
cessories in a frost-safe room.
Finish operation
Transport
When transporting by hand
When transporting in vehicles
Storage
Storing the Appliance
Frost protection