![background image](http://html2.mh-extra.com/html/karcher/k-2-350/k-2-350_manual_4247574014.webp)
14
English
The scope of delivery of your appliance is il-
lustrated on the packaging. Check the con-
tents of the appliance for completeness
when unpacking.
In the event of missing accessories or any
transport damage, please contact your
dealer.
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
Illustrations on Page 2
1 High pressure connection
2 Appliance switch "0/OFF“/ „I/ON“
3 Storage for high pressure hose
4 Transport handle
5 Storage for spray lance
6 Garden hose connector (female)
7 Water inlet connector
8 Water inlet (with water inlet filter)
9 Suction hose for detergent
10 Storage for trigger gun
11 Mains cable with mains plug
12 Bearing wheel
13 Trigger gun
14 Lock trigger gun
15 Clamp for high pressure hose
16 High pressure hose
17 Spray lance with Dirtblaster
18 Spray lance with pressure regulation
(Vario Power)
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 2
Illustration
Insert the transport handle.
Illustration
Insert holder for trigger gun.
Illustration
Insert the transport wheels and lock
them.
Attach the wheel caps.
Illustration
Pull out the clamp for the high-pressure
hose from the trigger gun (e.g. with a
small screwdriver).
Illustration
Connect high pressure hose to trigger
gun.
Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
Note:
Impurities in the water can damage
the high-pressure pump and accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
Observe regulations of water supplier.
For connection values, see type plate/tech-
nical data.
CAUTION
Garden hose (not included) must be at
least 1/2 inch or 5/8 inch in diameter, mini-
mum length 7.5 m.
Illustration
1 Screw the supplied coupling element to
unit’s water inlet.
2 Screw the supplied garden hose connec-
tor on to the end of your garden hose.
3 Push the garden hose connector on to
the water inlet connector and make
sure you hear it click into place before
proceeding.
Connect garden hose to the cold water
source and turn water on completely.
Operation
Scope of delivery
Special accessories
Description of the Appliance
Before Startup
Water supply
Water supply from mains