background image

12

 

English

CAUTION

„

Before cleaning any surface an in-
conspicuous area should be cleaned 
to test spray pattern and distance for 
maximum cleaning results.

„

If painted surfaces are peeling or 
chipping, use extreme caution as 
pressure washer may remove the 
loose paint from the surface.

„

When using on surfaces which might 
come in contact with food, flush sur-
faces with plenty of drinking water.

„

For additional cleaning tips and a 
complete video library, visit our web-
site:

www.karcherresidential.com

(with or without detergent)

. Pre-rinse 

deck and surrounding area with fresh 
water. If using detergent, apply to sur-
face at low pressure. For best results, 
limit your work area to smaller sections 
of approximately 25 square feet. Allow 
detergent to remain on surface 1-3 min-
utes. Do not allow detergent to dry on 
surface. Rinse at high pressure in a long 
sweeping motion keeping the spray noz-
zle approximately 3-6 inches from the 
cleaning surface. Always clean from top 
to bottom and from left to right. When 
moving on to a new section of the clean-
ing surface, be sure to overlap the previ-
ous section to eliminate stop marks and 
ensure a more even cleaning result. 

(with or without detergent). 

Pre-rinse 

cleaning surface with fresh water. If us-
ing detergent, apply to surface at low 
pressure (for best results, limit your 

work area to sections of approximately 
6 feet and always apply detergent from 
bottom to top). Allow detergent to re-
main on surface 1-3 minutes. Do not al-
low detergent to dry on surface, if 
surface appears to be drying, simply wet 
down surface with fresh water. If need-
ed, use special wash brush attachment 
(not included) to remove stubborn dirt. 
Rinse at high pressure from top to bot-
tom in an even sweeping motion keep-
ing the spray nozzle approximately 
6 inches from the cleaning surface. 

(with or without detergent).

 Pre-rinse 

cleaning surface with fresh water. If us-
ing detergent or Degreaser, apply to 
surface at low pressure. For best re-
sults, limit your work area to smaller sec-
tions of approximately 25 square feet. 
Allow detergent or Degreaser to remain 
on surface 1-3 minutes. Do not allow de-
tergent to dry on surface. Rinse at high 
pressure in a sweeping motion keeping 
the spray nozzle approximately 3-6 
inches from the cleaning surface. Al-
ways clean from top to bottom and from 
left to right. For removing extremely 
stubborn stains, use the Dirtblaster

®

 

Nozzle.

(with or without detergent).

 Pre-rinse 

vehicle with fresh water. If using deter-
gent, apply to surface at low pressure. 
For best results, clean one side of vehi-
cle at a time and always apply detergent 
from bottom to top, do not allow deter-
gent to dry on surface. If needed, use 
special wash brush attachment (not in-
cluded) to remove stubborn dirt. Rinse 

CLEANING TIPS

Deck Cleaning

House Siding

Cement Patios, Brick and Stone

Cars, Boats & Motorcycles

Summary of Contents for K 2.350

















Reviews: