background image

16 

English

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there 
is no pressure in the system.

After operation with detergent: Fill the 
detergent tank with clear water, turn the 
spray lance with pressure regulator to 
the position "Mix", switch the appliance 
on for about 1 minute and rinse with 
clear water.

Release the lever on the trigger gun.

Turn off the appliance "0/OFF".

Turn off tap.

Detach the appliance from the water 
supply.

Press the lever on the trigger gun to re-
lease any remaining pressure in the 
system.

Lock the lever on the trigger gun.

Pull out the mains plug.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
during transport (see Specifications).

Lift appliance by the carrying handle 
and carry it.

Secure the appliance against shifting 
and tipping over.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
when selecting a storage location for it (see 
Specifications).

Prior to extended storage periods, as dur-
ing the winter, also observe the instructions 
in the Care section.

Park the machine on an even surface.

Insert the trigger gun in its holder.

Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.

Caution

Protect the appliance and its accessories 
against frost.

The appliance and its accessories can get 
destroyed through frost if there are any wa-
ter residues in them. To avoid damage to 
them:

Completely drain all water from the ap-
pliance: Switch the appliance on with 
detached high-pressure hose and de-
tached water supply (max. 1 minute) 
and wait, until no more water exits at the 
high-pressure connection. Turn off the 
appliance.

Store the appliance and the entire ac-
cessories in a frost-safe room.

Finish operation

Transport

When transporting by hand

When transporting in vehicles

Storage

Storing the Appliance

Frost protection

Summary of Contents for K 2.250





























Reviews: