6
English
Î
STEP 1:
Connect the high pressure hose to
the unit’s high pressure outlet.
Î
STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
Î
STEP 3:
Connect garden hose to unit’s water
inlet.
Î
STEP 4:
Connect garden hose to the cold
water source and turn water on
completely.
Î
STEP 5:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a working outlet.
– Press “RESET” button.
– Press “TEST” button.
Red indicator on “RESET” button
should appear.
– Press “RESET” button again for use.
WARNING
Do not use if above test fails.
Note: The actual appearance of the GFCI may
be different from this illustration.
Î
STEP 6:
Unlock the trigger gun safety lock.
Trigger the gun to eliminate trapped
air, wait for a steady flow of water to
emerge from the spray nozzle.
Î
STEP 7:
Turn on the high pressure washer (I).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.
OPERATING INSTRUCTIONS
Summary of Contents for K 2.25
Page 1: ...English 2 Espa ol 17 Fran ais 32 K 2 25 5 961 983 0 01 2007...
Page 47: ......
Page 48: ......
