![background image](http://html2.mh-extra.com/html/karcher/k-2-150/k-2-150_operators-manual_4221290006.webp)
6
English
Screwdriver, small size
(not supplied)
for connecting high pressure hose and
trigger gun.
STEP 1:
Slide the transport handle into place.
STEP 2:
Attach the accessories holder.
STEP 3:
Install the supplied connector to the
unit’s water inlet.
Note
: Never attach the garden hose
connector to the unit’s water inlet!
STEP 4:
Insert one end of the high pressure
hose into the trigger gun until it locks
audibly.
Note:
Make sure the connection nip-
ple is aligned correctly. Check the
connection by pulling on the high
pressure hose.
Check the secure connection by pull-
ing on the high pressure hose.
Disconnect:
Press the disconnect key on the trig-
ger gun and remove the high pres-
sure hose from the trigger gun.
STEP 1:
Connect the high pressure hose to
the unit’s high pressure outlet.
STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
STEP 3:
1 Screw the supplied garden hose con-
nector on to the end of your garden
ASSEMBLY INSTRUCTIONS
Required tools
Assembly
OPERATING
INSTRUCTIONS
Summary of Contents for K 2.150
Page 48: ......