6
English
Î
STEP 1:
Connect the high pressure hose to
the unit’s high pressure outlet.
Î
STEP 2:
Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
Î
STEP 3:
Connect garden hose to unit’s water
inlet.
Î
STEP 4:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
Î
STEP 5:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a working outlet.
– Press “RESET” button.
– Press “TEST” button.
Red indicator on “RESET” button
should appear.
– Press “RESET” button again for use.
WARNING
Do not use if above test fails.
Note: The actual appearance of the GFCI may
be different from this illustration.
Î
STEP 6:
Unlock the Safety lock. Trigger the
gun to eliminate trapped air, wait for
a steady flow of water to emerge
from the spray nozzle.
Î
STEP 7:
Turn on the high pressure washer (I).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.
OPERATING INSTRUCTIONS
Summary of Contents for K 2.110 M
Page 1: ...English 2 Espa ol 17 Fran ais 32 5 961 872 0 01 06 K 2 26 M...
Page 47: ......
