background image

6

WORKING WITH DETERGENTS

Step 2

Fill a container with Kärcher

detergent. Place the filter end of detergent
suction tube into the container.

Step 3

Turn on the pressure washer.

Pull trigger to operate unit: Liquid detergent
is drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface.

Detergents can only be applied at low pressure (-).

Caution

Never use:

• Bleach, Chlorine products and other 

corrosive chemicals

• Liquids containing solvents 

(i.e., paint thinners, gasoline, oils)

• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.

For best results see Cleaning Tips
on pages 8 & 9 or included clean-
ing guide for specific information
on how to clean different surfaces.
Always Use Kärcher 
Detergents for Best Results.

Kärcher biodegradable detergents are
specially formulated to protect the environ-
ment and your pressure washer. The special 
formula won’t clog the suction tube filter and
will protect the internal parts of the pressure
washer for a longer life. For Kärcher
Detergents, check your retailer or call:

In USA Call: 

1-800-537-4129

or visit our website:

www.karcher-usa.com

5

WARNING 

RISK OF INJECTION OR INJURY-
DO NOT DIRECT DISCHARGE
STREAM AT PERSONS.
TO AVOID SERIOUS INJURY,
NEVER POINT SPRAY NOZZLE
AT YOURSELF, OTHER PERSONS
OR ANIMALS.

GFCI INSTRUCTIONS

Step 1

Plug the Ground Fault

Circuit Interrupter (GFCI) into a
working outlet.

Step 2

Press “TEST”, then

press “RESET” to assure proper
connection to power.

Note: 
The actual
appearance
of the GFCI
may be
different
from this
illustration. 

Step 1

Install the Wash brush or Quattro nozzle. 

OPERATING INSTRUCTIONS – 

continued

Step 6

Turn on the pressure washer. The

motor starts only if the trigger of the gun is
pulled and shuts off when the trigger is
released.

Step 5

Turn Quattro Nozzle to desired setting position. Match symbols above. 

The following Kärcher detergents are available:

LIQUIDS TABLETS
(ready to use)

(concentrated)

Vehicle Wash

All Purpose

House Wash

Degreaser

Degreaser

Deck and Patio

Deck Wash

Windows and Siding

All Purpose Cleaner

Vehicle Wax

High pressure
pencil jet
cleaning

High pressure
fan jet clean-
ing

Rotating jet for
maximum dirt
cutting action

Low pressure
Fan jet 
for detergent
injection

K1400 electric 6/27/02  6/27/02  10:01 AM  Page 6

Summary of Contents for K 1400








Reviews: