Kärcher K 1, User Manual

Page: 16 / 22

16 English
Illustrations on Page 2
1 Connection for water supply with filter
2 High pressure connection
3 Switch „ON/OFF“ / „ECO“
4 Battery charge indicator
5 Indicator lamp Eco mode
6 Carrying handle
7 Storage for spray lance
8 Battery pack
9 Battery compartment
10 Trigger gun
11 Lock trigger gun
12 Clamp for high pressure hose
13 High pressure hose
14 Charger
A LED1
B LED2
15 Foam nozzle with detergent container
16 Spray lance with high pressure nozzle
17 Suction hose
18 Coupling element for water connection
** not included in the scope of
delivery
19 Water supply hose
Use a fabric reinforced water hose.
Minimum length 7.5 m.
Minimum diameter, 1/2 inches (13 mm).
Special accessories expand the possibilities
of using your appliance. Please contact your
KÄRCHER dealer for further information.
Mount loose parts delivered with appliance
prior to start-up.
Illustrations on Page 2
Illustration
 Insert the battery into the battery com-
partment.
Illustration

Screw the coupling element to the wa-
ter connection on the appliance.
Illustration
 Pull out the clamp for the high pressure
hose from the hand spray gun.
Illustration
 Connect high pressure hose to trigger
gun.
 Push the clamp in until it locks. Check
the secure connection by pulling on the
high-pressure hose.
Note: The battery is partially charged at the
time of delivery. Charge it before appliance
startup and then as and when required.
Please follow the instructions of the battery
charger.
 Park the appliance on an even surface.
Illustration
 Connect the high pressure hose to the
high pressure connection of the appli-
ance.
According to the applicable regula-
tions, the appliance must never be
used on the drinking water supply
without a system separator. Use a
suitable system separator manufactured by
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA.
Water flowing through a system separator
is considered non-drinkable.
CAUTION
Always connect the system separator to the
water supply, never directly to the appliance!
ATTENTION
Impurities in the water can damage the
high-pressure pump and the accessories.
For protection, the use of the KÄRCHER
water filter (optional accessory, order no.
4.730-059) is recommended.
For connection values, see type plate/tech-
nical data.
Observe regulations of water supplier.
Illustration
 Attach the water supply hose to the
coupling on the water connection.
 Connect the water supply hose to the
water supply.
 Completely open the water tap.
Description of the Appliance
Special accessories
Assembly
Start up
Water supply
Water supply from mains