Kärcher IVM 100/36-3, Original Instructions Manual

Page: 16 / 248

16 English
21
Spacer lock
22
Floor nozzle holder
23
Chassis
Symbols on the device
Initial startup
몇 WARNING
Danger from dust that is harmful to your
health
Respiratory sicknesses through inhalation
of dust.
Do not vacuum without correctly installed
filter elements, otherwise a danger to
health from increased fine dust emission is
present.
ATTENTION
Missing filter element
Damage to the suction motor
Do not vacuum without a filter element.
1. Bring the device into the working posi-
tion.
2. Secure the device with the parking
brakes.
3. Ensure that the suction head is fitted
correctly.
4. Insert the suction hose (not included in
the scope of delivery) into the suction
connection.
5. Check the filling level in the dirt recepta-
cle (see chapter Check the dirt recepta-
cle filling level ).
6. Empty the dirt receptacle if necessary
(see chapter Emptying the dirt recepta-
cle ).
7. Fit the dust bag before vacuuming dry
(see chapter Dry vacuuming )
8. Attach the desired accessories (not in-
cluded in the scope of delivery) to the
suction hose.
Check the dirt receptacle filling level
The dirt receptacle must be emptied when
filled to the lower edge of the suction hose
port on the dirt receptacle. The device does
not switch off automatically if the maximum
filling level is exceeded.
1. Check the dirt receptacle filling level reg-
ularly.
Operation
몇
WARNING
Danger from dust that is harmful to your
health
Respiratory sicknesses through inhalation
of dust.
Do not vacuum without correctly installed
filter elements, otherwise a danger to
health occurs from increased fine dust
emission.
ATTENTION
Danger due to fine dust entering
Risk of damage to the suction motor.
Never remove the main filter element when
vacuuming.
Dry vacuuming
Note
All types of dust up to dust class H can be
vacuumed with this device. The use of a
dust collection bag is required by law.
Note
The unit is an industrial vacuum cleaner for
vacuuming dry, non-flammable dusts.
Switching from wet to dry vacuuming
ATTENTION
Switching from wet to dry vacuuming
Risk of damage to the filter
Do not vacuum dry dust with a wet filter el-
ement because this clogs the filter and can
make it unusable.
1. Allow the wet filter to dry completely or
replace it with a dry filter before using
the device for dry vacuuming.
2. Replace the filter if necessary.
Inserting the dust bag
1. Secure the device with the parking
brakes.
Illustration B
Dust bag
(Order no. 9.989-607.0)
Main filter
(Order no. 6.907-651.0)
H14 filter
(Order no. 9.993-006.0)