Kärcher IB 10/8 L2P, Manual

Page: 11 / 216

English 11
Technische Daten
Technische Änderungen vorbehalten.
EU-Konformitätserklärung
Hiermit erklären wir, dass die nachfolgend
bezeichnete Maschine aufgrund ihrer Kon-
zipierung und Bauart sowie in der von uns
in Verkehr gebrachten Ausführung den ein-
schlägigen grundlegenden Sicherheits-
und Gesundheitsanforderungen der EU-
Richtlinien entspricht. Bei einer nicht mit
uns abgestimmten Änderung der Maschine
verliert diese Erklärung ihre Gültigkeit.
Produkt: Ice Blaster
Typ:

1.574-xxx (IB 10/8 L2P)
Einschlägige EU-Richtlinien
2006/42/EG (+2009/127/EG)
2014/30/EU
2011/65/EU
2009/125/EG + 2009/1781
Angewandte harmonisierte Normen
EN 60335-1
EN IEC 63000: 2018
EN 62233: 2008
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
Die Unterzeichnenden handeln im Auftrag
und mit Vollmacht des Vorstands.
Dokumentationsbevollmächtigter:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2021/02/01
Contents
General notes
Read the original instructions
before using the device for the
first time and act in accordance with it.
Keep the original instructions for future ref-
erence or for future owners.
Intended use
● The device is used to remove dirt with
dry ice pellets that are accelerated by an
air jet.
● The dry ice pellets are produced in the
device. This requires liquid carbon diox-
ide from a dip tube bottle.
● The device may not be operated in a po-
tentially explosive atmosphere.
● The minimum air exchange specified in
the "Technical data" section must be ob-
served at the operating location.
● The casing of the device may only be re-
moved by KÄRCHER Customer Service
for maintenance purposes.
CO
2
quality
To ensure trouble-free operation, the car-
bon dioxide used must at least comply with
the following specifications:
● Carbon dioxide technical, class 2.5 or
better
● Purity ≥ 99.5%
● Water content (H
2
O) ≤ 250 ppm
● NVOC (oil and fat) ≤ 2 ppm
Function
Carbon dioxide snow is created via decom-
pression of liquid carbon dioxide. The gas-
eous carbon dioxide that also arises is
carried away from the workplace via the ex-
haust hose.
The carbon dioxide snow is pressed into
dry ice pellets in the device.
Compressed air reaches the jet gun via a
solenoid valve. The air pressure is con-
trolled by an on-site pressure reducer.
When the trigger of the jet gun is activated,
the valve opens and the air jet emerges
from the jet gun. Dry ice pellets are addi-
tionally dosed into the air jet via a dosing
device.
The dry ice pellets hit the surface to be
cleaned and remove the dirt. The -79 °C
cold dry ice pellets also create thermal
stresses between the dirt and the object to
be cleaned, which also contribute to the
loosening of the dirt. In addition, the dry ice
immediately turns into gaseous carbon di-
oxide when it hits the surface, thus taking
up 700 times its volume. Dirt penetrated by
the dry ice is blown away as a result.
Environmental protection
The packing materials can be recy-
cled. Please dispose of packaging in
accordance with the environmental regula-
tions.
Electrical and electronic appliances
contain valuable, recyclable materials
and often components such as batter-
ies, rechargeable batteries or oil, which - if
handled or disposed of incorrectly - can
pose a potential threat to human health and
the environment. However, these compo-
nents are required for the correct operation
of the appliance. Appliances marked by this
symbol are not allowed to be disposed of
together with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials
can be found at:
www.kaercher.com/
REACH
Safety instructions
The device may only be operated by per-
sons who have read and understood these
IB 10/
8 L2P
Elektrischer Anschluss
Netzspannung V 220...
230
Phase ~ 1
Frequenz Hz 50...6
0
Anschlussleistung kW 1,0
Schutzart IPX4
Ableitstrom, typ. mA <3,5
FI-Schutzschalter delta I,
A 0,03
Druckluftanschluss
Druckluftschlauch, Nenn-
weite (min.) Zoll 0,5
Druck (max.) MPa
(bar) 1,0
(10)
Druckluftverbrauch, max. m
3
/
min
0,8
Leistungsdaten Gerät
Strahldruck, max. MPa
(bar) 1,0
(10)
Strahldruck, min. Stufe 1 MPa
(bar) 0,07
(0,7)
Strahldruck, min. Stufe 2 MPa
(bar) 0,14
(1,4)
Strahldruck, min. Stufe 3 MPa
(bar) 0,28
(2,8)
Kohlendioxidverbrauch kg/h 20...6
0
Rückstoßkraft der Strahl-
pistole, max. N 40
Kohlendioxidflasche
Maximale Füllmenge kg 37,5
Durchmesser, max. mm 220
Umgebungsbedingungen
Luftwechsel m
3
/h 2000
Maße und Gewichte
Typisches Betriebsge-
wicht (ohne Kohlendioxid-
flasche) kg 95
Länge mm 866
Breite mm 443
Höhe ohne Kohlendioxid-
flasche mm 970
Ermittelte Werte gemäß EN 60335-2-79
Hand-Arm-Vibrationswert m/s2 0,08
Schalldruckpegel dB(A) 95
Schallleistungspegel
LWA + Unsicherheit KWA dB(A) 115
General notes.................................... 11
Intended use...................................... 11
Function............................................. 11
Environmental protection................... 11
Safety instructions ............................. 11
Safety devices ................................... 13
Accessories and spare parts ............. 13
Scope of delivery............................... 13
Control elements ............................... 13
Initial startup ...................................... 13
Operation........................................... 14
Ending operation ............................... 15
Transport ........................................... 16
Storage.............................................. 16
Care and service ............................... 16
Troubleshooting guide ....................... 16
Warranty ............................................ 17
Accessories ....................................... 17
Technical data ................................... 17
Declaration of Conformity.................. 18