![background image](http://html1.mh-extra.com/html/karcher/hds-4-0-20-4-eg/hds-4-0-20-4-eg_user-manual_4214468013.webp)
Operating Manual HDS Premium 9.808-215.0
13
Suggestion to lift the appliance with a crane using a sling.
CAUTION
Risk of damage! Not recommended to load the
appliance with a forklift.
CAUTION
Risk of personal injury or damage! Mind the weight of
the appliance during transport.
When transporting in vehicles, secure the appliance
according to the guidelines from slipping and tipping
over.
ATTENTION
Protect trigger gun and lance from damage during
transport. It’s not suggested to transport with
accessories mounted on the appliance.
MAINTENANCE
WARNING: Unauthorized machine modification or
use of non-approved replacement parts may cause
personal injury and/or property damage and will void
the manufacturer warranty.
DANGER
Risk of injury by inadvertent start-up of appliance
and electric shock. Prior to all work on the appliance,
switch off the appliance and pull the power plug.
MAINTENANCE INTERVALS
Weekly
• Clean the sieve in the water connection.
• Clean the fine filter.
• Clean the fuel sieve.
• Check oil level.
ATTENTION
Risk of damage! In case of lacteous oil inform Kärcher
customer service immediately.
Monthly
• Clean filter at the detergent suck hose.
Every 500 operating hours, at least annually
• Oil change.
• Have the maintenance of the device performed by the
customer service.
STORAGE
ATTENTION: Risk of damage. Frost will destroy the
appliance if the water has not been completely drained.
Protect from freezing by storing in a heated area, by
draining the water on the machine or by flushing the system
with antifreeze (use an automotive engine antifreeze or
windshield washer solvent to antifreeze). To flush the
system with antifreeze:
• Unscrew side panel to gain access to motor-pump.
• Disconnect hose and water filter on the pump head.
• Connect a hose directly on the pump head water inlet.
• Place the other end of the hose into a container of
antifreeze.
• Start the machine (without the burner) and allow to run
until antifreeze flows from the end of the wand. Squeeze
and release the trigger of the spray gun several times to
antifreeze the unloader system.
• Also draw antifreeze through the detergent inlet line to
antifreeze the detergent system.
For added protection after anti-freezing, disconnect the
high pressure hose from the machine. After coil has been
drained, reconnect pressure hose.
If the pressure washer is not to be used for an extended
period of time, it is also recommended that the system is
flushed with antifreeze for rust protection.
During storage:
• Lock in the spray lance into the holder on the appliance
cover.
• Roll up the high pressure hose and electrical power cord
and hang them into the respective holders.
Note:
Do not twist the high pressure hose nor the electrical
power cord.
PREVENTIVE MAINTENANCE AND SERVICE
Summary of Contents for HDS 4.0/20-4 Eg
Page 2: ......