Kärcher HD 9/100-4 Cage Classic, Manual

Page: 11 / 220

English 11
Electrical and electronic appliances contain valu-
able, recyclable materials and often components
such as batteries, rechargeable batteries or oil,
which - if handled or disposed of incorrectly - can
pose a potential threat to human health and the environ-
ment. However, these components are required for the
correct operation of the appliance. Appliances marked
by this symbol are not allowed to be disposed of togeth-
er with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found
at:
www.kaercher.com/REACH
Accessories and spare parts
Only use original accessories and original spare parts to
ensure fault-free and safe operation of the device.
Information on accessories and spare parts can be
found at
www.kaercher.com .
Protective suit
Protective suit against high-pressure water jets with arm
and leg protectors.
High-pressure resistant to a maximum of 100 Mpa (flat
jet nozzle).
Hose catching fixture
The catching fixture connects the high-pressure hose to
an attachment point on the device or high-pressure gun.
It secures the high-pressure hose against whipping
away if the hose connection is unintentionally released.
 Catching loop: Order number 9.887-583.0
 Fastening rope: Order number 6.025-311.0
Scope of delivery
Check the contents for completeness when unpacking.
If any accessories are missing or in the event of any
shipping damage, please notify your dealer.
Safety instructions
 It is essential that you read the safety instructions
5.963-314.0 before initial startup.
 Observe the national regulations for liquid jet clean-
ers.
 Observe the national accident prevention regula-
tions. Liquid jet cleaners must be tested regularly.
The test result must be recorded in writing.
 Do not modify the device or accessories.
Symbols on the device
The device may not be connected to the pub-
lic drinking water network.
The high-pressure jet must not be directed at
persons, animals, live electrical equipment or
at the device itself. Protect the device from
frost.
Always wear suitable hearing protection and
safety goggles when working with the device.
Hot surface. Do not touch.
Dangerous electrical voltage. Access only for
qualified electricians.
Safety devices
몇 CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
The safety devices are set and sealed by the manufac-
turer. Adjustments are performed only by customer ser-
vice.
Safety valve
The safety valve opens when the permissible operating
pressure is exceeded and the water flows into the open.
Power switch
The power switch prevents the device from starting up
unintentionally. Turn the power switch to 0/OFF during
work breaks or when finishing work.
Safety latch
The safety latch on the high-pressure gun prevents the
high pressure water jet from being triggered uninten-
tionally.
Overflow valve with pressure relief
Only the Adv version has this function.
When the high-pressure gun is closed, the overflow
valve opens and the entire water volume flows back to
the suction side of the high-pressure pump. The pres-
sure in the high-pressure hose drops. This reduces the
actuating force of the high-pressure gun and extends
the service life of the device.
Water shortage safeguard
The water shortage safeguard switches off the motor if
the water supply is inadequate.
The water shortage safeguard indicator light lights up.
Thermostat valve
The thermostat valve protects the high-pressure pump
from overheating in circulation mode when the high-
pressure gun is closes. The thermostat valve opens
when the water temperature exceeds 80 °C and chan-
nels the hot water into the open.
Motor circuit breaker
The motor circuit breaker interrupts the motor circuit
when the current consumption of the motor is too high.
Size Order number
M 6.547-055.0
L 6.547-056.0
XL 6.547-057.0