background image

General safety instructions

DANGER

 

Ɣ࣯

Risk of asphyxiation. Keep pack-

aging film out of the reach of children. 

WARNING

 

Ɣ࣯

Only use the device for its proper 

use. Take into account the local conditions and beware 

of third parties, in particular children, when working with 

the device. 

 

Ɣ࣯

The device is not intended for use by per-

sons with restricted physical, sensory or mental abilities 

or those lacking in experience and / or lacking in knowl-

edge. 

 

Ɣ࣯

Only people who have been instructed on how 

to use the device, or have proven their ability to operate 

it, and have been explicitly instructed to use it, must use 

the device.

 

Ɣ࣯

Children must be supervised to prevent 

them from playing with the appliance.

 

Ɣ࣯

Children and 

minors must not use the device.

CAUTION

 

Ɣ࣯

Safety devices are provided for 

your own protection. Never modify or bypass safety de-

vices.

Risk of electric shock

DANGER

 

Ɣ࣯

Only connect protection class I de-

vices to properly earthed power sources.

 

Ɣ࣯

The voltage 

indicated on the type plate must match the voltage of 

the power source.

 

Ɣ࣯

Take into account the minimum pro-

tection required for the socket, see chapter Technical 

data in the operating instructions.

 

Ɣ࣯

Only operate the

device via a fault current protection switch (maximum 

30 mA).

 

Ɣ࣯

Never touch the mains plug and socket with 

wet hands.

 

Ɣ࣯

The mains plug and coupling of the exten-

sion cable must be water tight and may not be placed in 

water. The coupling may not be on the floor. Use cable 

drums to ensure that the sockets are at least 60 mm 

above the floor.

 

Ɣ࣯

All live parts in the work area must be

protected against water jets.

WARNING

 

Ɣ࣯

Only connect the device to an

electrical connection which has been set up by a quali-

fied electrician as per IEC 60364-1.

 

Ɣ࣯

Check the power 

supply cable with mains plug for damage before opera-

tion each time. Do not put the device into operation with 

a damaged power supply cable. Have a damaged pow-

er supply cable replaced immediately by the authorised 

customer service / qualified electrician. 

 

Ɣ࣯

Do not dam-

age the power supply and extension cable by running 

over it, crushing or yanking it or similar. Protect the pow-

er supply cable from heat, oil and sharp edges.

 

Ɣ࣯

Only 

use the mains connection cable prescribed by the man-

ufacturer, including when replacing the cable. For order 

no. and type see operating instructions.

 

Ɣ࣯

Unsuitable 

electrical extension cables can be dangerous. Only use 

approved and appropriately marked electrical extension 

cables with a sufficient cable cross section for outdoors.

 

Ɣ࣯

Only replace couplings on the power supply or exten-

sion cable using those with the same water density and 

the same mechanical strength. 

CAUTION

 

Ɣ࣯

In case of longer breaks in opera-

tion and after use, switch off the device at the main 

switch / device switch and pull the mains plug.

ATTENTION

 

Ɣ࣯

Switch-on procedures will gener-

ate short-term voltage drops.

 

Ɣ࣯

Unfavourable mains 

conditions may cause other devices to be impaired.

 

Ɣ࣯

In 

case of a network impedance of less than 0.15 ohms, 

no malfunctions are to be expected.

Water connection

WARNING

 

Ɣ࣯

The device must not be started

up if the high-pressure hose is damaged. Replace a 

damaged high-pressure hose at once. Only those 

hoses and connections recommended by the man-

ufacturer may be used. For order no. see operating 

instructions

Ɣ࣯

The screw connections of all connection 

hoses must be leak-tight. 

ATTENTION

 

Ɣ࣯

Observe the regulations at your 

water distribution company.

Operation

DANGER

 

Ɣ࣯

When using the device in hazard

zones (e.g. service stations), adhere to the respective

safety regulations.

 

Ɣ࣯

Operation in explosive atmos-

pheres is prohibited. 

 

Ɣ࣯

Never suction solvents, liquids 

containing solvents or undiluted acids. This includes 

e.g. petrol, paint thinner or heating oil. The spray mist is 

highly flammable, explosive and poisonous. 

 

Ɣ࣯

Dam-

aged wheels / tyre valves are extremely dangerous. 

Damaged wheels / tyre valves can be damaged by the 

high-pressure jet and explode. The first sign of this is 

discolouration of the tyres. Keep a spray distance of at 

least 30 cm when cleaning the wheels / tyre valves.

WARNING

 

Ɣ࣯

Do not use the device if people 

without the proper protective clothing are in its reach.

 

Ɣ࣯

With short spray lances, your hand may come into 

contact with the high-pressure jet. Never use a spotlight 

nozzle or rotary nozzle with steel tubes that are shorter 

than 75 cm.

 

Ɣ࣯

A recoil force will arise due to the water 

stream ejecting from the spray lance. An angular spray 

lance produces a force that acts in upward direction. 

Make sure you grip the gun and spray lance firmly.

 

Ɣ࣯

When using angular spray units, recoil forces and

twisting forces may alter.

 

Ɣ࣯

Do not aim the high-pres-

sure jet at yourself, e.g. to clean clothes or shoes. 

 

Ɣ࣯

Do 

not direct the high-pressure jet at persons, animals, live 

electrical equipment or at the device itself.

 

Ɣ࣯

Do not 

spray any objects which contain harmful substances 

(e.g. asbestos). 

 

Ɣ࣯

Check the device and the accesso-

ries, such as the high-pressure hose, high-pressure gun 

and safety devices, to make sure they are in proper safe 

and reliable condition before each operation. Do not use 

the device if it is damaged. Replace damaged compo-

nents immediately.

 

Ɣ࣯

Only use high-pressure hoses, 

control panels and couplings specified by the manufac-

turer.

CAUTION

 

Ɣ࣯

Never leave the device unsuper-

vised while it is in operation. 

 

Ɣ࣯

Never open the cover 

while the motor is running.

 

Ɣ࣯

Never clamp the lever of 

the high-pressure gun during operation.

 

Ɣ࣯

Allow the 

hoses to cool down after hot water operation or operate 

the device briefly using cold water operation.

 

Ɣ࣯

The de-

vice must be placed on an even, firm subsurface. 

 

Ɣ࣯

Be-

fore cleaning, carry out a risk assessment of the surface 

to be cleaned to determine any health and safety pro-

tection requirements. The necessary protective meas-

ures must be taken accordingly.

ATTENTION

 

Ɣ࣯

Do not operate the device at tem-

peratures below 0 °C.

 

Ɣ࣯

Only clean the motor at wash-

ing stations with an oil separator.

Operation with detergent

CAUTION

 

Ɣ࣯

Keep the detergent out of the 

reach of children.

 

Ɣ࣯

When using detergents, observe the 

safety data sheet of the detergent manufacturer, in par-

Summary of Contents for HD 7/20 G Classic
















Reviews: