background image

10

CLEANING TIPS

Deck Cleaning

(with or without detergent)

Pre-rinse deck and surrounding area with

fresh water. If using Kärcher Deck & Patio

Cleaner,  (

Canada:  Deck  +  Fence  Wash)

place  detergent  suction  tube  directly  into

cleaning solution and apply to surface at

low  pressure.  For  best  results,  limit  your

work area to smaller sections of approxi-

mately 25 square feet. Allow detergent to

remain on surface 1-3 minutes. Do not allow

detergent to dry on surface. Rinse at high

pressure in a long sweeping motion keeping

the spray nozzle approximately 3-6 inches

from  the  cleaning  surface.  Always  clean

from  top  to  bottom  and  from  left  to  right.

When moving on to a new section of the

cleaning  surface,  be  sure  to  overlap  the

previous  section  to  eliminate  stop  marks

and ensure a more even cleaning result.

Caution: 

Do  not  use  Dirtblaster

®

  spray

nozzle  on  wood  surface  as  it  may  cause

damage.

House Siding

(with or without detergent)

Pre-rinse cleaning surface with fresh water.

If  using  Kärcher  Exterior  House  Cleaner

(

Canada: Pressure Wash

), place detergent

suction tube directly into cleaning solution

and apply to surface at low pressure (for

best results, limit your work area to sections

of approximately 6 feet and always apply

detergent  from  bottom  to  top).  Allow

detergent to remain on surface 1-3 minutes.

Do not allow detergent to dry on surface, if

surface appears to be drying, simply wet

down surface with fresh water. Rinse at high

pressure  from  top  to  bottom  in  an  even

sweeping motion keeping the spray nozzle

approximately 6 inches from the cleaning

surface.

Caution:

 

Do  not  use  Dirtblaster®  Spray

Nozzle on siding as it may cause damage.

Cement Patios, Brick and Stone

(with or without detergent)

Pre-rinse cleaning surface with fresh water.

If  using  Kärcher All  Purpose  and  Vehicle

Wash  (

Canada:  Pressure  Wash

  or

Degreaser

), place detergent suction tube

directly into cleaning solution and apply to

surface at low pressure. For best results,

limit your work area to smaller sections of

approximately  25  square  feet.  Allow

detergent to remain on surface 1-3 minutes.

Do not allow detergent to dry on surface.

Rinse at high pressure in a sweeping motion

keeping the spray nozzle approximately 3-

6 inches from the cleaning surface. Always

clean from top to bottom and from left to

right.  For  removing  extremely  stubborn

stains,  use  Kärcher  Dirtblaster®  Spray

Nozzle.

Cars, Boats & Motorcycles

(with or without detergent)

Pre-rinse vehicle with fresh water. If using

Kärcher All  Purpose  and  Vehicle  Wash,

(Canada: Pressure wash or vehicle wash)

place  detergent  suction  tube  directly  into

cleaning solution and apply to surface at low

pressure. For best results, clean one side

of  vehicle  at  a  time  and  always  apply

detergent from bottom to top, do not allow

detergent to dry on surface. Rinse at high

pressure in a sweeping motion keeping the

spray nozzle approximately 6-8 inches from

the  cleaning  surface  (distance  should

increase when rinsing pin-striping or other

sensitive surfaces). Always clean from top

to  bottom  and  from  left  to  right.  For  best

results, wipe surface dry with a chamois or

soft dry cloth.

Caution:

 

Do  not  use  Dirtblaster®  Spray

Nozzle on vehicles as it may cause damage.

Summary of Contents for HD 3.1 / 31 P














Reviews: