![background image](http://html1.mh-extra.com/html/karcher/hd-3-0-27-g/hd-3-0-27-g_service-manual_4189559023.webp)
9.801-760.0 Service Manual, Catch Up
23
PRESSURE
W
ASHER
Tr
oub
leshooting Guide
PROBLEM
POSSIBLE CAUSE
SOLUTION
ENGINE OPERATES
FOR 15 MINUTES
THEN STOPS
Not enough gas or engine oil
Fill tank with gas. Check oil level.
Vapor lock developed by heat of day
Keep gas tank full to avoid vapor locking.
Obstruction in fuel filter
Clean or replace fuel filter.
ENGINE LACKS
POWER
Dirty air filter
Replace air filter.
ENGINE FALTERS
Choke is opened too soon
Move choke to halfway position until engine
runs smoothly.
WATER DRIPPING
FROM UNDER PUMP
Piston packing worn
Call local distributor.
O-Ring plunger retainer worn
Call local distributor.
Cracked piston
Call local distributor.
OIL DRIPPING
FROM UNDER PUMP
Oil seal worn or damaged
Call local distributor.
WATER LEAKING
FROM PUMP
PROTECTOR
Spray gun closed with machine
running 5 minutes or longer
Open spray gun or turn off machine.
Excess water supply pressure
Place a pressure regulator at end of 50'
garden hose.
NO DETERGENT
Detergent suction tube not properly
connected to machine
Check connection.
Detergent is too thick
Dilute detergent. For best results, use
manufacturers detergent.
Detergent filter valve is at lowest
setting
Set detergent filter valve to a higher setting.
Filter on detergent suction tube is
clogged
Run warm water through filter to remove
debris.
Damaged or clogged detergent suc-
tion tube
Remove obstruction or replace detergent
suction tube.
A high pressure nozzle is attached.
Replace with black detergent nozzle.
Discharge nozzle is obstructed
Blow out or remove debris with fine needle.
GARDEN HOSE
CONNECTION
LEAKS
Loose fittings
Tighten fittings.
Missing/worn rubber washer
Insert new washer.
SPRAY WAND
LEAKS
Spray wand not properly attached
Slide the spray wand into the gun. Turn the
wand collar clockwise onto the spray gun
threads until tight.
Broken o-ring
Call local distributor and order an o-ring.
PUMP IS NOISY
Pump is sucking air
Check that hoses and fittings are air tight.
Turn off machine and purge pump by
squeezing trigger gun until a steady flow of
water emerges through nozzle.
TROUBLESHOOTING
For Models: HD 3.0/27 G, HD 3.5/35 G, HD 4.0/40 G, HD 4.0/40Ge