background image

9.800-083.0  •  REV. 11/06

5

  PRESSURE 

W

ASHER 

OPERA

TOR’S MANU

AL
  

WARNING: High pressure spray 
can cause paint chips or other 
particles  to  become  airborne 
and fly at high speeds. To avoid 
personal  injury,  eye  and  foot 
safety devices must be worn. 

   6.  Eye,  ear  safety  devices  and 

hand, foot protection must be 
worn when using this equip-
ment.

  7.  High pressure developed by these machines will 

cause personal injury or equipment damage. Use 
caution when operating. Do not direct discharge 
stream  at  people,  or  severe  injury  or  death  will 
result.

  8.  Never  make  adjustments  on  machine  while  in 

operation.  

WARNINg

keeP WATeR  

SPRAY AWAY FRoM  

eleCTRICAl WIRINg.

SAFeTY INFoRMATIoN CoNT.

   9.  Do not operate with spray gun in the off position 

for extensive periods of time as this may cause 
damage to the pump.

 10.  The best insurance against an accident is precau-

tion and knowledge of the machine.

 11.  Manufacturer  will  not  be  liable  for  any  changes 

made to our standard machines, or any compo-
nents not purchased from us.

 12.  Read engine safety instructions provided.

WARNING:  Keep  water  spray 

away  from  electrical  wiring  or 

fatal electric shock may result.

 13.  Never run pump dry or leave 

spray gun closed longer than  
1-2 minutes.

 14.  Do not allow children to oper-

ate the  pressure washer at 
any time.

 15.  Inlet  water  supply  must  be 

cold and clean fresh water.

WARNING: This  machine  is  to  be  used  only  by 

trained operators.

WARNINg

PRoTeCTIve 

eYeWeAR ANd 

CloTHINg MUST  

be WoRN.

Summary of Contents for HD 2.8/20 Pb-1.575-150.0















Reviews: