background image

– 2

1 High pressure hose
2 Hand spraygun
3 Spray lance
4 Pressure/ quantity regulation
5 Triple nozzle
6 Fuel tank
7 Device for manual start
8 Oil tank
9 Connection for water supply with filter
10 High pressure connection
11 Manometer
12 Storage for spray pipe
13 Oil dip (engine)
14 Dosage valve for detergent
15 Detergent suction hose with filter
16 Motor
17 High pressure pump
18 Battery *
19 Lever for motor stop *
* only HD 1050 DE

High-pressure jets can be dan-
gerous if improperly used. The 
jet may not be directed at per-

sons, animals, live electrical equipment or 
at the appliance itself.

According to the applicable regula-
tions, the appliance must never be 
used on the drinking water supply 
without a system separator. Use a 
suitable system separator manufactured by 
KÄRCHER; or, as an alternative, a system 
separator as per EN 12729 Type BA. Water 
flowing through a system separator is con-
sidered non-drinkable. 

Caution

Always connect the system separator to 
the water supply, never directly to the appli-
ance!

High pressure cleaner to clean: Machines, 
Vehicles, Structures, Tools, Facades, Ter-
races, Gardening tools, etc.

Use only the high pressure jet without 
detergent for cleaning facades, terrac-
es, garden equipment, etc. 

For stubborn dirt, we recommend the 
use of the dirt blaster as a special ac-
cessory.

Danger

Risk of injury! Follow the respective safety 
regulations when operating at gas stations 
or other dangerous areas.

Please follow the national rules and 

regulations for fuel spray jets of the re-

spective country.

Please follow the national rules and 

regulations for accident prevention of 

the respective country. Fuel spray jets 

must be tested regularly and the results 

of these tests must be documented in 

writing.

Danger

Do not use high pressure cleaners 
when there has been an oil spill; move 
the appliance to another spot and avoid 
any sort of spark formation. 

Do not store, spill or use fuel in the vi-
cinity of open flames or appliances such 
as ovens, boilers, water heaters, etc. 
that have an ignition flame or can gen-
erate sparks. 

Device elements

Symbols on the machine

Risk of burns! Beware of hot 
components.

Risk of poisoning! Do not 
breathe in the exhaust fumes.

Proper use

Please do not let mineral oil contaminated 
waste water reach soil, water or the sew-
age system. Perform engine cleaning and 
bottom cleaning therefore only on speci-
fied places with an oil trap.

Safety instructions

13

EN

Summary of Contents for HD 1050 B Cage













Reviews: