9
Illustration
1:
Pass the detergent siphon hose (A) under
the machine, aligning the detergent fi ll hole
on the detergent tank (B) towards the front of
the machine. Place detergent hose (A) into
the detergent hose hole on the back of the
detergent tank (B), and insert until the hose
end rests on the bottom of the deepest part
of the tank.
Illustration
2:
Insert hexagonal ¼” bolts (C) into tank knobs
(D). Insert through the fl anges on the edges
of the detergent tank (B), into the holes on
the frame, and tighten.
Illustration
3:
Feed axle (G) through spacer ½" (F) and
hub of wheel (E). Insert assembly into axle
mount at back of frame. Push straight side of
cotter pin (H) through hole in axle until locked
in place. Repeat on other side of unit.
Assembling
Illustration 4:
Mount nozzle holder (K) to handle as shown
in illustration, align holes, insert ¼” carriage
bolts (L) and secure with knob with nut (M).
Illustration
5:
Attach the handle to the frame of the pres-
sure washer. Align holes in handle with holes
in lower frame, insert carriage bolts (I), and
tighten with knobs (J).
Illustration 6:
Place the quick connect nozzles (N) in the
nozzle holder (K).
Illustration 7:
Push the wand (O) into the spray gun (P) and
then thread the connection to secure.
Illustration 8:
Remove the oil dipstick from the engine and
add correct amount of oil. Be sure oil level is
between “FULL/MAX” and “ADD/MIN” marks
on dipstick with machine on level surface.
Replace oil dipstick.
OPERATING INSTRUCTIONS
STEP
1:
Pull the spring-loaded collar of the wand back
to insert your choice of quick connect nozzle.
Release the collar and push the nozzle until-
the collar clicks.
CAUTION
High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.
Make sure you hear a "click" when inserting
the nozzle tip in to the wand.
Pull the nozzle to make sure it is seated
properly before operating your unit.
STEP 2:
Attach the high pressure hose to the trigger
gun.
Release the collar and push the high pressure
hose until the collar clicks.
ASSEMBLY INSTRUCTIONS