background image

English

„

Read the operating instructions of 
the engine manufacturer before 
start-up and follow the safety instruc-
tions carefully. 

WARNING 
When using this product basic pre-
cautions should always be followed, 
including the following:

„

Read all the instructions before us-
ing the product.

„

To reduce the risk of injury, close su-
pervision is necessary when a prod-
uct is used near children.

„

Know how to stop the product and 
bleed pressures quickly. Be thor-
oughly familiar with the controls.

„

Stay alert – watch what you are doing.

„

Do not operate the product when fa-
tigued or under the influence of alco-
hol or drugs.

„

Keep operating area clear of all per-
sons.

„

Do not overreach or stand on unsta-
ble support. Keep good footing and 
balance at all times.

„

Wear safety goggles.

„

Follow the maintenance instructions 
specified in the manual.

WARNING 
Risk of Injection or Injury – Do Not Di-
rect Discharge Stream At Persons.

„

High pressure jets can be dangerous 
if misused. The jet must not be di-
rected at persons, animals, electrical 
devices, or the unit itself.

„

Do not spray electrical connections, 
electrical outlets or fixtures.

WARNING 
Risk Of Explosion – Do not spray 
flammable liquids.

„

Do not use acids, alkaline, solvents, 
or any flammable material in this 
product. These products can cause 
physical injuries to the operator and 
irreversible damage to the machine.

WARNING 
Gun Kicks Back – Hold with both 
hands.

„

The Trigger Gun Safety Lock pre-
vents the trigger from accidentally 
being engaged. This safety feature 
DOES NOT lock trigger in the ON 
position.

WARNING 
The engine exhaust from this prod-
uct contains chemicals known to the 
State of California to cause cancer, 
birth defects or other reproductive 
harm.

CAUTION
Risk of Asphyxiation – Use this prod-
uct only in a well ventilated area.

„

Operate and fuel machine in a well 
ventilated area, free of devices fea-
turing an open pilot or flame such as 
boilers, water heaters, etc.

CAUTION
Risk of Fire – Do not add fuel when 
the product is operating.

„

Do not operate if fuel has been 
spilled. Instead, move the machine 
to a different location and avoid cre-
ating sparks.

„

The machine has hot surfaces which 
can cause burns. Operate the unit in 
a safe environment and away from 
children.

„

Do not touch hot surfaces or allow 
accessories to contact hot surfaces.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for G 3000 BH























Reviews: