background image

4

IMPORTANT PRECAUTIONS – 

Read First!

IMPORTANT SAFETY INSTRUCTIONS

WARNING

 – When using this product basic

precautions  should  always  be  followed,

including the following:

WARNING

  – Risk of Injection or Injury –

Do Not Direct Discharge Stream At Persons.
• Read all the instructions before using the

product.

• Fire hazard! Do not add fuel with the en-

gine running. Do not operate if fuel has

been spilled. Instead, move the machine

to a different location and avoid creating

sparks.

• Operate and fuel machine in a well venti-

lated area, free of devices featuring an

open pilot or flame such as boilers, water

heaters, etc.

• High pressure jets can be dangerous if

subject to misuse. The jet must not be

directed  at  persons,  animals,  electrical

devices, or the machine itself.

• Wear safety goggles.
• Do not use acids, alkaline, solvents, or

any flammable material in this product.

These products can cause physical inju-

ries to the operator and irreversible da-

mage to the machine.

• The machine has hot surfaces which can

cause burns. Operate the unit in a safe

environment and away from children.

• Do not allow the high pressure hose to

come into contact with the muffler guard.

• Do not leave the machine running unat-

tended.

• Learn how to stop the machine and re-

lease pressure quickly. Be thoroughly fa-

miliar with the controls.

• Stay alert — watch what you are doing.
• Do not operate the product when fatigued

or under the influence of alcohol or drugs.

• Do not stand on unstable surfaces.  Stand

with both feet balanced at all times.

• Avoid tipping the machine on its side.

• The  Gun  Safety  Lock  PREVENTS  the

trigger from accidentally being engaged.

This  safety  feature  DOES  NOT  lock

trigger in the on position.

• Do not spray electrical connections, elec-

trical outlets or fixtures.

• Do not touch hot surfaces or allow acces-

sories to contact hot surfaces.

• Do not operate in an enclosed space, ex-

haust fumes are dangerous.

• Do not operate near utilities with open fla-

mes.

• Do not operate pressure washer without

the water turned on.

• Do not use hot water.

WATER SUPPLY (Cold Water Only)

• Water hose must be at least 5/8 inch in

diameter.

• Flow rate of water supply must not fall

below 2.5 GPM (gallons per minute).

• Flow rate can be determined by running

the water for one minute into an empty

5-gallon container.

• The water supply temperature must not

exceed 104°F/40°C.

• Never use the pressure washer to draw

in water contaminated with solvents, e.g.

paint thinners, gasoline, oil, etc.

• Always prevent debris from being drawn

into  the  unit  by  using  a  clean  water

source.

We strongly recommend that this high pres-

sure washer not be left running for periods

of 5 minutes or longer without the trigger

gun being engaged.

- SAVE THESE INSTRUCTIONS -

Summary of Contents for G 2800 OH














Reviews: