![background image](http://html2.mh-extra.com/html/karcher/g-2600-pc/g-2600-pc_operators-manual_3725645012.webp)
12 English
Pump Mainenance
The pump on your Kärcher pressure washer
does not require maintenance. Any attempts
to service or alter the pump may damage your
pressure washer and void your product warranty.
Carry out maintenance tasks for the engine
according to the specifications provided in the
operating instructions provided by engine
manufacturer.
WINTERIZING AND LONG-TERM STORAGE
MAINTENANCE INSTRUCTIONS
CLEANING TIPS
Kärcher pump
Engine
Deck Cleaning
House Siding
1:
Disconnect all water connections.
2:
Turn on the machine for a few seconds, until
the water which had remained in the pump
exits, turn off immediately.
3:
Do not allow high pressure hose to become
kinked.
4:
Store the machine and accessories in a
room which does not reach freezing tempera-
tures. DO NOT store near furnace or other
sources of heat as it may dry out the pump
seals.
CAUTION
Failure to follow the above directions will result in
damage to the pump assembly and accessories
and will void the warranty.
Kärcher® also recommends the regular practice of
using a pump protector like “Kärcher® Pump
Guard” to prevent cold weather damage during
storage in the winter months.
Initial Use
All Kärcher pumps ship with oil already inside di-
rect from the factory. There is no need to add oil.
Pump Inspection
You should routinely make a visual inspection of
the pressure washer’s pump. If you notice oil
leaking around the pump seals, you should take
the pressure washer to a Kärcher-Authorized
Service Center for repair. (You can locate a ser-
vice center in your area online at www.karcher-
residential.com)
(with or without detergent)
. Pre-rinse cleaning
surface with fresh water. If using detergent, apply
to surface at low pressure (for best results, limit
your work area to sections of approximately 6
feet and always apply detergent from bottom to
top). Allow detergent to remain on surface 1-3
minutes. Do not allow detergent to dry on sur-
face, if surface appears to be drying, simply wet
down surface with fresh water. If needed, use
special wash brush attachment (not included)
to remove stubborn dirt. Rinse at high pressure
from top to bottom in an even sweeping motion
keeping the spray nozzle approximately 6 inches
from the cleaning surface.
CAUTION
Do not use Dirtblaster spray nozzle on siding
as it may cause damage.
(with or without detergent)
. Pre-rinse deck and
surrounding area with fresh water. If using
detergent, apply to surface at low pressure.
For best results, limit your work area to smaller
sections of approximately 25 square feet. Allow
detergent to remain on surface 1-3 minutes. Do
not allow detergent to dry on surface. Rinse at
high pressure in a long sweeping motion keeping
the spray nozzle approximately 3-6 inches from
the cleaning surface. Always clean from top to
bottom and from left to right. When moving on to
a new section of the cleaning surface, be sure
to overlap the previous section to eliminate stop
marks and ensure a more even cleaning result.
CAUTION
Do not use Dirtblaster spray nozzle on wood
surface as it may cause damage.