Kärcher CV 66/2, Instruction Manual

Page: 11 / 148

English
11
Î Bend the locking plate outward and pull
the bearing block out from the bottom.
Î
Pull the brush roller off the driver and re-
move.
Î
Pull the bearing block off the brush roller.
Note
The front and rear brush rollers are different.
In order to achieve the best cleaning effect,
the brushes must be installed correctly. The
correct assembly is indicated on the bottom
of the appliance:
The indicated part numbers (PN) are listed
on the driver side of the brush rollers.
Î Insert the bearing block onto the new
brush roller.
Î Insert the brush roller onto the driver and
turn until the driver pin locks into the
brush.
Î Insert the bearing block into the appli-
ance and push in far enough for the lock-
ing plate to lock into place.
Î
Repeat process on the second brush
roller.
Note
Always replace brushes in pairs.
몇
Warning
Risk of injury. Pull the plug from the mains
before carrying out any tasks on the appli-
ance.
Î Plug in the main plug.
Î Check facility fuse.
Î Reset the brush drive fuse on the control
panel.
Î Gear defective, contact Customer Serv-
ice.
Î Reset the suction turbine fuse on the
control panel.
Î Reset the suction turbine fuse on the
control panel.
Î Filter bag is full; the indicator 'filter bag
full' glows. Replace filter bag.
Î Remove the brush rollers (see "Replace
brush rollers"), clean suction channel in
the brush head and check the suction
hose.
The warranty terms published by our com-
petent sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in fabri-
cation. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service center. Please
submit the proof of purchase.
– Only use accessories and spare parts
which have been approved by the manu-
facturer. The exclusive use of original ac-
cessories and original spare parts
ensures that the appliance can be oper-
ated safely and troublefree.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
– For additional information about spare
parts, please go to the Service section at
www.kaercher.com.
Troubleshooting
Appliance is not working
Brushes do not turn
Suction turbines do not run
Insufficient vacuum performance
Warranty
Accessories and Spare Parts