Kärcher CR 7.220, Manual

Page: 10 / 88

– 3
Proceed as follows to replace the connect-
ing hose:
 Remove the side panel and loosen the
hose clamp using a screwdriver.
 Pull out the hose.
The product is maintenance-free.
CAUTION
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it.
 Lift the appliance at the handle, remove
it from the wall mount and transport it.
Illustration
 If the connecting hose is separated
from the water source, it can be coiled
around the extracted hose holder.
 If necessary, store Kärcher garden ac-
cessories directly on the accessory
holder.
Ensure that the hose is completely drained
prior to storing it. The water is best drained
by uncoiling the entire hose. The sprayer
must be open during this procedure.
CAUTION
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it.
 Store the appliance in a frost free area.
Only use original accessories and spare
parts, they ensure the safe and trouble-free
operation of the device.
For information about accessories and
spare parts, please visit www.kaerch-
er.com.
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The signatories act on behalf of and with
the authority of the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Straße 28-40
71364 Winnenden (Germany)
Tel.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2018/10/01
Transport
When transporting by hand
Storage
Storing the Appliance
Accessories and Spare Parts
EU Declaration of Conformity
Product: Hose box
Type: 2.645-xxx
Relevant EU Directives
2006/42/EC (+2009/127/EC)
Applied harmonized standards
EN ISO 12100
Applied national standards
-
Chairman of the Board of Management Director Regulatory Affairs & Certification
10 EN