Kärcher BDS 43/150 C Classic, Original Instructions Manual

Page: 4 / 12

– 2
Safety devices serve to protect the user
and must not be rendered in operational or
their functions bypassed.
Prevents the appliance from being
switched on accidentally. To start the appli-
ance, first press the unlock button and then
the ON/OFF switch.
Prior to operation, the push rod must be in-
stalled as shown and the appliance has to
be connected to power.
Illustration on the inside of the front
cover
1 Actuator, disc brush / pad driver plate
2 Brush / pad driver plate with pad
3 Dosing lever for detergent solution (op-
tion)
4 Switch ON / OFF
5 Cable hook
6 Unlocking button
7 Handle
8 Lever for level adjustment
9 Fuse for brush drive
10 Socket for accessories
11 Detergent tank (option)
12 Motor casing
 The power cord must be checked regu-
larly for damages, such as cracks or ag-
ing. If damage is found, the cable must
be replaced before further use.
 Check appliance for damage, have
damages repaired by customer service.
– For connection values, see technical
data and type plate.
– The electrical connections must be
done by an electrician according to IEC
60364-1.

DANGER
Risk of electric shock.
– Do not drive over the mains cable.

DANGER
Risk of injury!
– Never wrap the mains cable around
your body or your neck.
– Do not let the mains cable come in con-
tact with the rotating brushes or rotating
pads.
 Disconnect the mains plug from the
socket.
 Pull the lever for level adjustment.
 Swivel the handle to the front into a ver-
tical position.
 Release the lever for level adjustment.
 Tilt the appliance rearward.
Safety Devices
Lock
Install the push rod
Device elements
Start up
Power connection
Attach the brush/pad
4 EN