Kärcher BD 43/25 C Bp, Service Manual

Page: 25 / 229

English
9.808-230.0 Rev. 01 (03/20)
25
No special functional characteristics.
Note
Unless otherwise described, the installation takes place in
reverse order.
1 Dirt water drain hose
2 waste water tank
3 Fresh water tank
4 Fresh water tank lock
 Empty the waste water tank via the waste water drain
hose.
 Remove the waste water tank.
 Empty the fresh water tank via the cap on the fresh wa-
ter tank.

AGBS Uninstall / install batteries

AFSB Uninstall/ install suction bar
1 Base
 Lay the device on the side.
Note
Use a suitable base.
1 Cover
2 Dirt water drain hose

After draining the waste water via the waste water drain
hose, close the opening air-tight by means of the cap.
Note
Otherwise air is drawn in through the leaky opening due to
the vacuum in the waste water tank. As a consequence the
waste water starts foaming.
This foam is possibly drawn in by the suction turbine and
may destroy it.
030 Function
040 Service activities
AEAA Lay the device on its side for maintenance work