![background image](http://html1.mh-extra.com/html/karcher/b602-plus/b602-plus_instruction-manual_3970853007.webp)
7
Please follow these instructions carefully
for troublefree cleaning.
Use the diagram on Page 6 for reference purposes.
3.2 Water Connection
• The minimum length of supply hosepipe advised for maximum user
convenience is 7.5 metres with a diameter of 12.5 mm (1/2") to allow
free flow of inlet water to the machine so avoiding backpressure and
any associated potential damage to your machine.
• Attach your supply hosepipe with its connector to the coupling on the
machine (No.9) and the other end should be connected to a suitable
water supply.
3.3 Electrical Connection
• Ensure the Power Switch (No.4) is in the “OFF” position before
connecting the factory fitted Plug attached to the Mains Electric Lead
(No.5) into an earthed socket. (it is recommended that an RCD plug
socket is used.)
• The Mains Electric Lead can be unwound to an appropriate length.
The Automatic Mains Lead Rewinding (No.6) audibly locks into place
for every half revolution.
NOTE: With Mains Electric Lead not unwound completely hose reel
can warm up until 60 °C. There is no reduction of function/security of
the pressure washer for this reason.
3.4 Suction Mode -
an added benefit of the Karcher Pressure Washer
• If you are drawing water from a static water supply such as a water
butt disconnect the water connection/hosepipe with coupling (No.9)
from the machine and replace with a suction hose and filter (Part
No. 4.440.238) that can be purchased as an accessory.
• Disconnect the Spray Lance from the Spray Gun.
• Allow the pressure washer to operate without the Spray Lance fitted
until water flows from the Spray Gun without bubbles.
Summary of Contents for B602 plus
Page 1: ...5 960 264 01 02 B602 plus...
Page 19: ...19 10 ASSEMBLY...