Kärcher AFG 100, Manual

Page: 17 / 232

English 17
Colour level assignments (factory setting)
Note
The colours are adjustable when the brightness level is
set to "0".
Selecting the colour levels
You can configure up to ten colours and up to nine col-
our change intervals.
Changing colour levels
You can manually assign any available colour to each of
the colour levels 1...10.
1 Press and hold the colour button until it flashes.
2 Press the "+" or "-" button to change the colour of the
selected colour level.
3 Press the Colour button again to save the colour un-
der the respective number.
Switching the lighting on/off
Setting the brightness of the light ring
1. Press the brightness button to set the brightness of
the light ring.
 The brightness button lights up.
Display
Setting the brightness levels
You can set up to ten brightness levels for the light ring.
Switching the timer on
1. Press the timer button to switch on the timer.
 The timer button lights up.
Setting the timer
You can set the timer within a range of 1 to 99 hours.
Display
The timer allows the device to be operated for a config-
urable period of time. The device switches off automat-
ically after the configured period of time.
The remaining time in hours is displayed when the timer
is selected. The displayed value changes when each
full hour expires, i.e. if "3" is displayed then the remain-
ing running time lies between 3.00 hours and 2.01
hours. The display does not change to "2" until the re-
maining time reaches 2.00 hours.
Resetting the timer
Measuring the air quality with the VOC
sensor
1. Press the Air quality button to measure the air qual-
ity with the VOC sensor.
 The air quality is indicated via the LED ring for ap-
prox. 10 seconds. The timer button lights up.
 The display shows "--".
 The LED ring lights up red during the air quality sen-
sor warm-up period.
Display
Colour level Colour
0 White Not adjustable
1 Red Adjustable
2 Green Adjustable
3 Blue Adjustable
4 Red-yellow Adjustable
5 Yellow Adjustable
6 Yellow-green Adjustable
7 Cyan Adjustable
8 Cyan-blue Adjustable
9 Magenta Adjustable
10 Magenta-red Adjustable
Selecting col-
our level 1...10 Press the "+" button to select the de-
sired colour. Hold the "+" button
pressed to automatically change the
colour.
Press the "-" button to select the de-
sired colour. Hold the "-" button
pressed to automatically change the
colour.
Select colour
level 0. Press the colour button twice in suc-
cession to select colour level "0".
Switching the
lighting on Press the Brightness button twice in
succession if the light ring lighting is
switched off.
 The lighting is set to the last level
selected.
Switching the
lighting off Press the brightness button twice in
succession.
Display Meaning
0 The lighting is switched off.
1...10 Brightness level 1...10 is set.
Setting the
brightness lev-
els Press the "+" button to increase the
brightness level. Hold the "+" button
pressed to automatically change the
brightness level.
Press the "-" button to decrease the
brightness level. Hold the "-" button
pressed to automatically decrease the
brightness level.
Setting the re-
maining run
time. Press the "+" button to increase the re-
maining run time. Hold the "+" button
pressed to automatically increase the
remaining run time.
Press the "-" button to decrease the
remaining run time. Hold the "-" button
pressed to automatically decrease the
remaining run time.
Display Meaning
0 The timer is reset.
1...99 A remaining run time of 1...99 is set.
Resetting the
timer Press the timer button twice in succes-
sion to reset the timer to "0".
Display Meaning
Red Poor air quality
Yellow Medium air quality
Green Good air quality