Kärcher AB 84 EU Operating Instructions Manual Download Page 7

GROUNDING INSTRUCTIONS  

86371920 AB 84 12/14/12 

                       

THIS PRODUCT IS FOR COMMERCIAL USE 
ONLY. 
 

ELECTRICAL: 

 

T

he amp,  hertz, and voltage are listed on the data 

label found on each machine.  Using voltages 
above or below those indicated on the data label 
will cause serious damage to the motors.

 

 

EXTENSION CORDS: 

 

If an extension cord is used, the wire size must be 
at least one size larger than the power cord on the 
machine, and must be limited to 50 feet (15.5m) in 
length. 
 

GROUNDING INSTRUCTIONS: 

 

This appliance must be grounded.  If it should 
malfunction or break down, grounding provides a 
path of least resistance for electric current to 
reduce the risk of electric shock.  This appliance is 
equipped with a cord having an equipment-
grounding conductor and grounding plug.  The 
plug must be inserted into an appropriate outlet 
that is properly installed and grounded in 
accordance with all local codes and ordinances. 

 
 
 

Improper connection of the equipment-
grounding conductor can result in a risk of 
electric shock.  Check with a qualified 
electrician or service person if you are in doubt 
as to whether the outlet is properly grounded.  
Do not modify the plug provided with the 
appliance - if it will not fit the outlet, have a 
proper outlet installed by a qualified 
electricia

n.

 

Summary of Contents for AB 84 EU














Reviews: