Kärcher A Plus SC21 Operation Instruction And Parts List Manual Download Page 4

- SEEK EMERGENCY MEDICAL CARE if the spray appears to have penetrated the 

  skin! DO NOT TREAT AS A SIMPLE CUT! Be prepared to tell a physician exactly 

  what kind of cleaning agents you were using by reading the Material Safety Data 

  Sheet provided with your detergent.
- Never use any solvents or highly corrosive detergents or acid type cleaners with 

  this rotary surface cleaner. 
- Protective equipment such as rubber suits, gloves and respirators are advisable, 

  especially when using cleaning detergents.
- Keep all detergents out of the reach of children!

- ALWAYS wear protective goggles when operating the unit to shield the eyes from 

  flying debris and detergents.
- DO NOT direct spray toward fragile materials such as glass—shattering could occur.

 

- Stay alert-watch what you are doing. Do not operate the unit when fatigued or 

  under the influence of alcohol or drugs.
- NEVER squeeze the trigger unless securely braced.
- DO NOT overreach or stand on unstable support.
- Wet surfaces can be slippery, wear protective foot gear and keep good footing and 

  balance at all times.

HAZARD

RISK OF BODILY INJURY

POTENTIAL CO

NSEQUENCE

Serious injur

y or 

death may occur from detergents contacting or penetrating the skin.

POTENTIAL CONSEQUENCE

Injury may occur from the rotary surface cleaner.

- ALWAYS hold on firmly to the handles of the Rotary Surface Cleaner when 

  operating the unit. Failure to do so can cause the Cleaner to move dangerously. 

  To prevent accidental discharge, the trigger gun should be securely locked when 

  not in use.
- Always wear eye and ear protection when using the Rotary Surface Cleaner. Other 

  protective clothing such as a rubber suit, gloves, respirator, etc., may be necessary 

  when using detergents.
- Never make adjustments on the machine while in operation.
- DO NOT leave pressurized unit unattended. Shut off the pressure washer and 

  release trapped pressure before leaving.
- Know how to stop the Rotary Surface Cleaner. Be thoroughly familiar with controls.
- Never place hands or feet under the cover assembly during operation to prevent

  injury from rotating spray arm and high pressure injection.

POTENTIAL CONSEQUENCE

Serious injury can occur from loose debris being propelled at a high speed 

from the spray gun.

POTENTIAL CONSEQUENCE

Injury may occur if the operator loses

 

his balance caused by the thrust of 

water travelling through the spray nozzle.

4

Summary of Contents for A Plus SC21














Reviews: