-
2
Check the power cord with mains plug for
damage before every use. If the power cord
is damaged, please arrange immediately
for the exchange by an authorized custom-
er service or a skilled electrician.
To avoid accidents due to electrical faults
we recommend the use of sockets with a
line-side current-limiting circuit breaker
(max. 30 mA nominal tripping current).
Caution
Certain materials may produce explosive
vapours or mixtures when agitated by the
suction air!
Never vacuum up the following materials:
–
Explosive or combustible gases, liquids
and dust particles (reactive dust parti-
cles)
–
Reactive metal dust particles (such as
aluminium, magnesium, zinc) in combi-
nation with highly alkaline or acidic de-
tergents
–
Undiluted, strong acids and alkalies
–
Organic solvents (such as petrol, paint
thinners, acetone, heating oil).
In addition, these substances may cause
the appliance materials to corrode.
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Illustrations on Page 2
1 Carrying handle
2 ON/OFF switch
3 Blowing connection
4 Air regulation of the blowing function
5 Suction hose connection
6 Swivel casters
7 Accessory mount
8 Storage, power cord
9 Power cord with plug
10 Suction hose
11 Handle with supplementary air shutter
12 Suction tubes 2 x 0.5 m
13 Floor nozzle, reversible
14 Crevice nozzle
15 Car vacuuming tool
16 Filter bag
Illustration
Fold down the carrying handle.
Remove the motor casing and take ac-
cessories out of the container.
Illustration
Fit the swivel casters on the container
bottom. Insert filter bag if required.
Illustration
Put motor casing onto container and
lock it.
Illustration
Connect accessories.
Description of the Appliance
Attaching the Accessories
8
EN
