8
English
K 590 GM
1 Handle
2 Detergent hose with filter
3 Throttle lever
4 Pull-start handle
5 Tank lid
6 Hand gun with safety catch and
high-pressure hose
7 Spray lance extension
8 Spray lance
9 Two-stage nozzle
10 High-pressure outlet
11 Hose coupling
12 Water inlet with strainer
13 Oil filler hole with dipstick
1.1 Unpacking the unit
!
!
!
!
!
Should you notice any transport damage during
unpacking, notify your dealer immediately.
!
!
!
!
!
Because you care about the environment, please
do not dispose of packaging components in regu-
lar domestic waste. Instead, take the items to a
collection point for recycling.
1.2 Attaching the accessories
!
!
!
!
!
Screw the spray lance extension onto the hand
gun.
!
!
!
!
!
Insert the spray lance into the bayonet connection
on the extension, and push against the spring
tension, before turning the lance through 90° to
lock it into place.
!
!
!
!
!
Mount the handle onto the unit.
!
!
!
!
!
Connect the high-pressure hose to the high-
pressure outlet.
1.3 Engine
!
!
!
!
!
Prior to using the unit, read the operating instruc-
tions supplied by the engine manufacturer, and
pay particular attention to the safety instructions.
!
!
!
!
!
Fill the fuel tank with unleaded petrol. Do not use
a petrol/oil mixture for two-stroke engines.
!
!
!
!
!
The engine is supplied without engine oil. A cer-
tain amount of engine oil is packaged with the
unit. Pour this engine oil into the oil filler hole on
the engine.
!
!
!
!
!
Check the engine oil level. Do not start the engine
if the oil level has dropped below the „MIN“ level.
Top up oil if necessary.
1.4 Pump
!
!
!
!
!
The pump is filled with oil. An oil change is not
required.
– FIRE HAZARD! Do not operate the high-
pressure cleaner if fuel has been spilled.
Instead, move the machine to a different
location and avoid creating sparks of any
kind.
– Do not store, spill or use engine fuels near
open flame or in the vicinity of devices
featuring an open pilot flame, such as
boilers, water heaters, etc., or device that
may create sparks of any kind.
– Keep flammable items and materials
away from the engine silencer (minimum
distance: 2 meters).
– Do not operate the motor without the si-
lencer, and check and clean the latter on
a regular basis. Replace if necessary.
– Do not use the motor in woods, scrubs
and grasslands without having a spark
catcher attached to the silencer.
– Except during engine tuning, do not op-
erate the engine with the air cleaner re-
moved, or without a suitable cover over
the air intake.
– Do not make adjustments to governor
springs, governor linkages or other parts
that may result in a higher engine RPM.
– BURN HAZARD! Do not touch hot si-
lencers, cylinders or cooling fins.
– Always keep hands and feet away from
moving or rotating parts.
– ASPHYXIATION HAZARD! Exhaust
fumes are poisonous. Never operate the
unit in enclosed rooms.
1. Unit Start-Up
Summary of Contents for 590 GM
Page 1: ...5 956 336 Ä 09735 12 95 ...