K 3001
English
9
Tips for working with the cleaner
■
Badly stained areas should be sprayed
separately, and the detergent left to soak in
for 5–10 minutes.
■
Carpets should be rinsed with clear water after
cleaning has been completed so that all traces
of detergent are removed. Allow carpet to dry
out thoroughly before walking on it again.
n
If you use warm water (up to 50° C) you
achieve better cleaning results.
n
If the textile layer has become impregnated
with moisture after wet cleaning, we
recommend our Care Tex RM 762 **, which is
a dirt-repellent and anti-static proofing agent,
to help to prevent dirt building up again
quickly.
When cleaning has finished
■
Switch off spray pump
■
Switch off suction turbine
■
Unplug cleaner from mains
■
Empty detergent reservoir.
Note: Liquid that has just been vacuumed up could
drip from the detergent reservoir while it is being
removed.
When the tubes and nozzles are pulled apart some
water may escape.
■
Empty dirt box.
Wet vacuuming
(Carpets/Hard surfaces)
(Vacuuming up moisture)
Accessories required
– Spraying and suction hose with handle
– Suction tubes (e.g. for cleaning the floor)
– Spray-hex nozzle
Getting started
■
Remove detergent reservoir
■
Empty dirt box
■
Mount motor housing onto dirt box, and lock
in place
■
Plug into mains socket
■
Switch on suction turbine
While cleaning is being carried out
The cleaner cuts out automatically when the dirt
box is full.
Note: Switch the suction turbine off after the cleaner
has cut out, otherwise the turbine will start up again
as soon as the cleaner is opened.
When cleaning has finished
■
Switch off suction turbine
■
Unplug cleaner from mains
■
Empty dirt box.
Dry vacuuming
(Carpets/Hard surfaces)
use household- set (special accessory)
(Vacuuming fine or coarse dry dirt)
Accessories required
– Spraying and suction hose with handle
– Suction tubes (e.g. for cleaning the floor)
Depending upon cleaning task:
– Upholstery nozzle, crevice nozzle
– Combination nozzle (carpet/hard surface)
Getting started
■
Remove detergent reservoir
■
Empty dirt box, and rinse out and dry if
required
n
The accessory (suction hose and tubes)
should be dry inside so that they don’t stick.
■
Vacuuming fine dry dirt:
Fit paper filter bag (see section “Tasks to be
carried out at regular intervals”).
Note: The paper filter bag may be damaged if coarse
or sharp objects are picked up by the vacuum cleaner.
■
Vacuuming coarse dry dirt:
Work without paper filter bag fitted.
■
Mount motor housing onto dirt box, and lock
in place
■
Plug into mains socket
■
Switch on suction turbine
■
Adjust vacuum power by adjusting sliding
control on handle.
** Special accessory
