Kärcher 2.642-533.0, Manual

Page: 9 / 60

-
3
1 Locking
 Unlock the lock.
 Pull the coin tray out to the side to re-
move the coin container.
 Pull the lock out.
 Tilt the front plate upward.
 Fold out the support and guide it into
the recess on the device.
See "Emptying the coin box/multifunction
unit".
 Open the coin acceptor, and clean the
coin channel with a moist cloth and
washing liquid.
 Fold away the support.
 Fold the front plate down and press it
shut until the lock arrests.
Maintenance schedule
Time Activity Assembly affect-
ed Performance By whom
daily empty Coins container Empty the coin container Operator
Multifunction
unit only:
opinion Tool storage box Check from the outside for foreing matters and contamination. Re-
move coarse contaminants. Operator
before the
frosting
period opinion Tool storage box Check both outlets for obstruction, clean if necessary. Operator
After 40
operating
hours or
once a
week Clean the filter Casing exterior
(stainless steel
and plastic Mix detergent "Wash hall and tile cleaner RM 841“ at 10%, apply to
the surfaces, let it soak for 2 to 3 minutes, do not allow to dry. Rinse
thoroughly with high pressure jet after the soak time. Operator
Mix detergent "Wash hall and tile cleaner RM 841“ at 20 %, apply to
the surfaces, let it soak for 2 to 3 minutes. After the soak-in time,
clean the surfaces with a moist pad or microfibre cloth and then rinse
thoroughly by a high pressure jet. If desired, larger areas can be
cleaned using a rubber edged "Squeegee". Operator
Care Casing exterior
(stainless steel) Take care of the stainless steel casing using steel cleaner. Operator
After 80
operating
hours or
once every
two weeks Cleaning and
preserving All stainless steel
parts of the case Remove dirt and deposits. Preserve the parts using special steel
care oil. Operator
After 200
operating
hours or
once a
month opinion Program selec-
tion switch Check the programme selection switch to see that it moves easily. Operator
opinion Splash guard of
coin acceptor Replace the splash guard if damaged. Operator
Spray Lock Spray lock with lock spray. Operator
Multifunction
unit only:
Clean the filter Tool storage box Clean the storage boxes. Operator
Quarterly Clean the filter Coin acceptor Clean the coin mechanism. Operator
Maintenance Works
Open the remote control
Opening the multifunction unit
Clean the coin mechanism
Close the remote control
9 EN