![background image](http://html1.mh-extra.com/html/karcher/130532/130532_original-instructions-manual_655393013.webp)
– 6
The scope of delivery of the device is illustrated on the
packaging. Check the content for completeness upon
unpacking.
In the event of missing accessories or any transport
damage, please contact your dealer.
Illustrations on Page 2
1
Coupling element for water connection
2
Water connection with integrated sieve
3
High pressure hose
4
Hose guide
5
Storage for spray lances
6
Storage / parking position for trigger gun
7
Connection for Plug 'n' Clean detergent
8
Carrying handle
9
Transport handle, detachable
10 Hose holder
11 High pressure connection
12 Appliance switch „0/OFF“ / „I/ON“
13 Mains cable with mains plug
14 Nameplate
15 Accessory compartment
16 Hooks for fastening the net
17 Net for accessory compartment
18 Bearing wheel
19 Base with carrying handle
20 Full Control trigger gun
21 Battery compartment
22 LED pressure indicator
MIX / 1 - SOFT / 2 - MEDIUM / 3 - HARD
23 Battery compartment lock
24 Lock trigger gun
25 Button for detaching the high-pressure hose from
the trigger gun
26 Full Control spray lance Vario Power
Carrying out the most common cleaning tasks.
Pressure levels: HARD / MEDIUM / SOFT / MIX
27 Full Control spray lance Dirtblaster
For strong contaminations.
Pressure level: HARD
28 Splash guard
See fold-out page 3 for illustrations
Mount loose parts delivered with appliance prior to start-
up.
You will need the 2 included screws as well as a Philips
screwdriver PH 2.
Illustration
Secure the wheels using the included plug. Align
the plug properly!
Insert the cover and screw in.
Illustration
Insert base.
Insert the included dowels all the way into the
holes.
Secure the base with the enclosed screws.
Illustration
Hook in storage for spray lances.
Secure the storage for the spray lances by means
of two screws.
Illustration
Attach the transport handle.
Secure the transport handle by means of two
screws.
Illustration
Hook the net into the hooks shown in the illustra-
tion.
Completely wind off the high-pressure hose and
disentangle any loops and knots.
Illustration
Put the disentangled high-pressure hose through
the hose guide from the back.
Illustration
Push the high pressure hose into the trigger gun
until it locks audibly.
Note:
Make sure the connection nipple is aligned
correctly.
Check the secure connection by pulling on the high
pressure hose.
Description of the Appliance
** Additionally required
29 Plug 'n' Clean detergent bottle with locking lid
30 Fabric-reinforced water hose with commercially
available coupling.
– Minimum diameter, 1/2 inches (13 mm).
– Minimum length 7.5 m.
Assembly
Install wheels
Installing the base
Install storage for spray lances
Install the transport handle
Attach the net to the accessory compartment
Winding off the high pressure hose
Putting the high pressure hose through the
hose guide.
Connect the high pressure hose to the
trigger gun
12
EN
Autogoods “130”
130.com.ua