![background image](http://html1.mh-extra.com/html/karcher/10090700/10090700_operating-instructions-manual_655154011.webp)
HANDLE INSTALLATION
86317990 FLOOR POLISHER 12/18/08
3-2
THE CORD ASM AND CORD HOOK.
ASSEMBLY, CHECK ORIENTATION OF
WHEN INSTALLING THE HANDLE
RECEPTACLE
MOTOR PLUG
1
2
3
ASSEMBLY
DECK
PLUG
MOTOR
6
4
5
(SEE NOTE)
HOLE
PIVOT
The handle must be installed by qualified personnel. Read all instructions
thoroughly. The machine is shipped with handle unassembled.
The machine is shipped with handle unassembled.
Follow these steps for installation:
1. Remove handle and deck assembly from carton.
2. Attach handle assembly to base using hardware kit
(86219680-PRV NO. 47331)
(attached to handle in a
plastic bag) items 1, 2, and 3.
NOTE: The spacers (items 1) are required for the correct operation of the handle. The spacers are
positioned completely inside the pivot holes in the casting, and are held in place by tightening the
bolts and washers (items 2 and 3) against the spacer.
3. Remove bolt, nut and washers (items 4, 5 and 6) from lower block on handle assembly. Attach links as
shown. Tighten bolt and nut securely, then back off 1/4 to 1/2 turn.
4. Check handle for movement up and down.
5. Plug motor cord into handle cord receptacle.
Summary of Contents for 10090700
