5.959-373 A 2006471 (06/03)
English
CWP 2000
Operating Instructions
I.1.3
Transportation, unloading
Transportation
All accessories forming part of the system are included in
the package.
The lifting equipment for loading and unloading must have
a minimum carrying power of 3.5 t.
If a fork lift truck is used, the length of the forks must be
1.90 m.
For lifting without a crate, there are two fastening points
(a) for fastening the hoisting gear. The following diagram
shows their position on the upper section of the system.
i
Important!
To intercept lateral forces on the fastening points,
a hoisting gear with a cross-bar must be used for lifting.
A brace (wooden crossbar) must be jammed between the
gantry columns at right angles to the direction of motion
to stop the system from folding up when it is lifted.
!
Danger!
When raised, the system tips forwards.
Transportation in a marine crate
If the system is delivered in a marine crate, the lid and
side parts of the crate have to be removed to unload it.
Having removed the crate parts, lift the system as
described in the section “Without transportation crate”.
I3
For technical personnel only
I
System installation
a
a
a Fastening points