10 English
NOTE: We recommend that you test
the GFCI as part of your startup pro-
cedure each time you use the device,
see chapter GFCI INSTRUCTIONS.
Do not use if GFCI fails test.
GFI Instructions
1. Plug the Ground Fault Circuit
Interrupter (GFCI) into a working outlet.
2. Press "TEST", then press "RESET" to
assure proper connection.
NOTE: Note: The actual appearance of
the GFCI may be different from this
illustration.
ATTENTION
:
Pump running dry will cause
damage to the device
.
If pressure does not build up in the
device after 2 minutes, then switch the
device off and proceed according to
the instruction in chapter, Trouble-
shooting guide.
High Pressure Operation
NOTE: Maintain a spraying distance
of at least 12 inches (30 cm) when
cleaning painted surface. Do not get
closer than 24 inches (60 cm) (0r 2
feet) when washing a vehicle.
1. Install the nozzle with the quick con-
nect on the end of the wand by pull-
ing the collar back, inserting the
nozzle, then pushing the collar back
Check to make sure that Nozzle is
secure
2. Turn on the machine by stepping
down on the foot pedal.
1 2
Operation Instructions
Summary of Contents for 1.106-200.0
Page 3: ...2 1 3 4 9 8 7 6 5 10 11 ...