OPERATIONS
BRC 46/38 C 86306850 12/27/07
3-6
Remove electrical cord and literature from
recovery tank. Fill solution tank (see filling
instructions page 3-5).
Adjust brush to proper setting.
Note: For
good operation the brush must skim the
carpet. If circuit breaker trips raise brush to
prevent damage to motor or carpet.
Plug cord into grounded outlet.
Note: Be sure
dome is seated on recovery tank, and float
shut-off is installed correctly.
STEP
1
STEP
2
STEP
3
STEP
4
CORRECT
INCORRECT
1/8in
(3mm)
PUMP VACUUM
ON ON
Turn on both Vacuum and Pump motor
switches (“ON”=“I”).
