=
=
DIN
Assembly instructions for 3 piece rose
Drill a 19mm hole in the door to allow
the spindle to be located through the
lock follower.
Attention: Insert the spindle in such a way that the
point of the grub screw can break through the
thinnest side.
Place the spindle in the lock
follower and centre it.
Tighten the grub screws on both levers ensuring they
pierce the spindle.
Place the lever base rose on the spindle and push onto
the mounting plates. Pay attention to the direction of the
lever handles ensuring they can be pressed
downwards.
Fix with screw-over ring
Fix the rose mounting plates (metal) to door and
secure with the M4 bolt through fixings
Karcher GmbH
Design-Beschläge
Raiffeisenstr.32
74906 Bad Rappenau
+49-7264-91640
+49-7264-916440
[email protected]
www.karcher-design.de
