![Karaoke Night KN200BT User Manual Download Page 14](http://html1.mh-extra.com/html/karaoke-night/kn200bt/kn200bt_user-manual_3467021014.webp)
13
TROUBLESHOOTING GUIDE
If you experience difficulties in the use of this Karaoke System please check the following or call
1-800-777-5331 for Customer Service.
PROBLEM
POSSIBLE CAUSE
SOLUTION
No power when
plugged in
AC adapter is not plugged into
the AC outlet.
Insert the AC adapter into the AC outlet.
The AC outlet may not have
power.
Check the outlet with a working lamp or
other electrical appliance.
CD/CD+G
PLAYER does not
work normally or
the LED TRACK
DISPLAY shows
“
no
” or “
Er
”
Disc inserted upside down.
Insert disc correctly.
Cable plugged into AUX IN
jack.
Remove AUX IN cable
Disc is dirty.
Wipe it clean with soft cloth.
Disc is scratched or warped
Use a new disc.
A non-standard disc is inserted. Only use discs bearing identification logos.
Lens is dirty.
Clean the optical pickup with a CD lens
cleaner.
Moisture has accumulated
inside the CD mechanism.
Wait about 20 to 30 minutes to let it dry out.
Karaoke System needs to be
reset.
Disconnect the machine from power source
for at least 3 minutes.
No sound through
TV or home
stereo
MASTER VOLUME CONTROL
control is set to minimum.
Turn up the MASTER VOLUME CONTROL.
Volume control on TV set or
home stereo is set to minimum.
Turn up the volume of the TV set or home
stereo.
TV set or home stereo power is
OFF.
Turn on the power at TV set or home stereo.
Source selection on your TV or
home stereo is not set properly.
Select AUX IN as the source for your TV or
home stereo.
Improper connection to the TV
or home stereo system.
Follow directions on “Connecting Audio to
TV or Home Stereo” section for connecting
to a home stereo system correctly.
Video cable is not connected
properly to the TV.
Connect the video cable to the VIDEO OUT
of the unit and to the TV VIDEO IN jacks.
No song lyrics
appear on the TV
screen
“Source” selector on TV is not
set to VIDEO or A/V IN
Use your TV Remote to select VIDEO or A/V
input.
TV does not have video line
input.
Connect from VIDEO OUT of the unit to a
RF modulator and then to the TV cable