Program
Installation
Pins
•
Click the gear icon at the bottom left corner of the main
screen.
•
Scroll down to the Installation Settings.
•
For our thermostat with 5 wires we will select Heat Pump
1 stage (if applicable) with default temperature tolerance.
•
Once finished the connector pins will be shown. Take a
picture of this screen.
•
Now disengage power and connect remaining wires using
the picture from the previous step.
•
If your heating and cooling system is a heat pump and it
blows warm air when your Karandash F-22 thermostat is
in cooling mode, your heat pump system uses a
changeover valve controlled by the O/B wire. Simply invert
the O/B values in the installation settings.
