2.2 List of applicable FCC rules
CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter
2.3 Specific operational use conditions
This module is stand-alone modular.If the end product will involve the Multiple simultaneously transmitting condition or
different operational conditions for a stand-alone modular transmitter in a host, host manufacturer have to consult with
module manufacturer for the installation method in end system.
2.4 Limited module procedures
This module is single modular with shielding
.
2.5 Trace antenna designs
Not applicable
2.6 RF exposure considerations
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 3.6cm between the radiator & your body.
2.7 Antennas
The following antenna will be used with the MCT247 module and integrated into Kar-Tech products,The MCT247 is not
designed for multiple antenna applications and should not be used to transmit simultaneously with any other transmitter.
The MCT247 is only certified to use the integrated wire antenna.Antenna Description:WIP Monopole antenna,
1.1dBi(Max.)
2.8 Label and compliance information
The final end product must be labeled in a visible area with the following" Contains FCC ID:P4U-MCT247.
2.9 Information on test modes and additional testing requirements
Host manufacturer which install this modular with limit modular approval should perform the test of radiated emission
and
spurious emission according t o FCC part 15C:15.247 and 15.209 requirement, only if the test result comply with FCC part
15.247 and 15.209 requirement, then the host can be sold legally.
2.10 Additional testing, Part 15 Subpart B disclaimer
Host manufacturer is responsible for compliance of the host system with module installed with all other applicable
requirements for the system such as Part 15 B.
1
2