8
8. Set Time & Date
It’s important to have your time and date set correctly as it will
record directly onto your video stream and is critical information
to prove your case to insurance companies etc. To set the time
on your KPT-550 follow the directions below.
a.
Ensure you are not currently recording. If the red record
indicator is flashing at the top left of the KPT-550’s screen,
push the OK/POWER button to stop recording.
b.
Push the MENU button twice, taking you to the SETUP
menu.
c.
Using the DOWN button highlight the setting named
Date/Time and push OK/POWER.
d.
Use the Up and Down buttons to cycle through the
numbers and use the OK/POWER button to confirm and
move between fields.
e.
Time is set and displayed in a 24 hour format.
f.
After setting the date and time the bottom DD/MM/YY
fields are used to change format that the date will be
displayed.
g.
Once the date and time have been set, the MENU button
can be used to save and exit.
9. Set Number Plate
To set the licence plate number to be stamped onto the footage
from your KPT-550 follow the directions below.
Use the MODE button to make sure you are in VIDEO mode
(Video camera icon will be displayed in the top left corner of
the screen).
a.
Ensure you are not currently recording. If the red record
indicator is flashing at the top left of the KPT-550’s screen,
push the OK/POWER button to stop recording.
b.
Push the MENU button, taking you to the VIDEO menu.
