Notes:
1. More details refer to the User Manual
；
2. For better readability, please print this document with laser printer;
3. Version: KP1200 - QuickGuide_EN_V10.docx
Reading techniques
1.
Press and hold the trigger, the imager projects a green LED square which allows positioning the
barcode within its field of view and turns on a white LED for illumination.
2.
When reading a barcode, the green LED square will be smaller when the imager is closer to the
barcode and larger when it is farther from the barcode. Please hold the imager at an
appropriate distance from the barcode and center the green LED square on the barcode.
3.
On a successful barcode reading, the imager will beep once, and the green LED square and
white LED will be turned off. Then the imager transmits barcode message to the host.
Scanning mode
Note: The factory default settings are indicated with asterisks (*).
Volume of beeper
Low
Middle
High*
Enable illumination in low light conditions
Notes: This function is only valid in auto-induction mode.
Disable*
Enable
USB settings
To configure the USB working mode use below codes
HID keyboard (*)
USB virtual COM
Keyboard Layout
To configure the country keyboard layout, use the below codes
More keyboard layouts are available on the User Manual
USA (*)
Italian
German
Installing the Stand
Note: The stand is an optional part