BATT+
GND
REM
POWER INPUT
FUSE
-
-
-
-
+
+
-
+
CH 3
CH 4
BRIDGE
+
CH 2
CH 1
+
-
+
SPEAKER
14
12
17
15
13
BRIDGE
Fig 2. Panel Layout for 4 Channel Class AB Amplifier
1.
Protection Indicate LED
•
Lights red when the short protection operates
2. Power Indicate LED
•
Lights blue when the power turns on.
8. Gain control
•
This control is used to match the input sensitivity of the
amplifier to the particular source unit that you are using.
9. Line In (RCA) Jacks
•
These RCA input jacks are for use with source units with Low
line level outputs. A source unit with a minimum output of
250mV is required for proper operation. However, this will
accept levels up to 6Vrms.
4
