11
Working in Manual mode:
In Manual mode the 962G self-leveling mechanism is
disabled and the laser beams can be set at any slope
required.
1. Verify that the locking switch #1 is on the OFF position.
2. Press and hold the beam selector button (a) for 3
seconds, to activate the manual mode. The laser level will
project all the beams: a 360° horizontal beam, vertical
beam and 2 plumb dots that will flash every 3 sec. to
let you know that the beam is not leveled. The beam
indicator (b) will turn on.
3. To mark a slope, tilt the laser to the desired angle.
4. To choose a beam, briefly press the beam selector button
(a) - it will change the beams by cycle:
All beams => Horizontal beam only => Vertical beam
only => Hori Vertical beams => Plumb dots only
=> OFF.
5. The last click on the beam selector button (a) will switch
OFF all the beams and the beam indicator (b) will turn off.
6. While in Manual mode, turning the locking switch #1 from
OFF to ON will turn off the Manual mode. The automatic
self – leveling mode will be activated (if the laser level is
within the self – leveling range).
Summary of Contents for Prolaser Multi Beam GREEN Orbital laser
Page 15: ...15...
